NextBase 222 user manual

The Wi-Fi button on the Nextbase 222 is used to enable or disable the Wi-Fi function on the dashcam. When Wi-Fi is enabled, you can connect your smartphone to the dashcam's Wi-Fi network and access the Nextbase app to transfer and view recorded videos, adjust settings, and share footage wirelessly.

To update your Nextbase 222 Dash Cam, follow these steps:
1. Download the Nextbase Cam Viewer software on your computer. It is available for both Windows and Mac systems. You can find the software on the Nextbase website under the "Support" or "Downloads" section.
2. Install the Nextbase Cam Viewer software on your computer by following the on-screen instructions.
3. Connect your Nextbase 222 Dash Cam to your computer using the provided USB cable. Make sure the Dash Cam is turned off before connecting it.
4. Launch the Nextbase Cam Viewer software on your computer.
5. Once the software detects your Dash Cam, it will prompt you to install any available updates. Click on the update notification or go to the software's "Settings" section to check for updates manually.
6. If an update is available, follow the on-screen prompts to download and install the latest firmware on your Dash Cam. This process may take several minutes, so make sure your computer and Dash Cam remain connected during the update.
7. Once the update is complete, safely disconnect your Dash Cam from your computer.
Your Nextbase 222 Dash Cam should now be updated with the latest firmware. Keep in mind that firmware updates may include improvements, bug fixes, and new features, so it's essential to keep your Dash Cam updated for optimal performance.

Yes, the Nextbase 222 Dash Cam has a feature called Night Vision. This feature uses an enhanced sensor and advanced software to capture clear footage in low-light or nighttime conditions.

Yes, Nextbase Dash Cams are compatible with a wide range of SD cards. The recommended type of SD card is a Class 10 Micro SD card, but some models may also support SDHC and SDXC cards. It is important to refer to the specific Dash Cam model's user manual or the Nextbase website to verify the compatible SD card types and maximum storage capacity.