NETGEAR NIGHTHAWK-AX6 user manual

The lights on your Nighthawk router indicate the various statuses and activities of the device. Here are the common lights and their meanings:
1. Power: This light indicates whether the router is receiving power. It should be solid green or white if the router is turned on and functioning properly.
2. Internet/WAN: This light indicates the status of your internet connection. It may blink when establishing a connection, and it should stay solid when connected to the internet.
3. LAN: This light indicates the status of the wired Ethernet connections on the router. It should blink or stay solid when a device is connected to one of the Ethernet ports.
4. Wireless: This light indicates the status of the Wi-Fi network. It may blink when devices are connected wirelessly or stay solid when the wireless network is active.
5. WPS: This light indicates if the Wi-Fi Protected Setup (WPS) feature is active. It may blink or stay solid when the WPS button is pressed or when a device is attempting to connect via WPS.
6. USB: This light indicates the status of any USB devices connected to the router, such as a USB storage device or printer. It may blink or stay solid when a USB device is connected and active.
Note: The specific lights and their meanings may vary depending on the model and firmware version of your Nighthawk router. Always refer to the user manual or documentation provided by the manufacturer for accurate information.

To set up your Nighthawk AX6 cable modem router, follow these steps:
1. Start by connecting your modem to the WAN (internet) port on the back of the router using an Ethernet cable.
2. Ensure the power cord is connected to the router and plug it into a power outlet. Turn on the router by pressing the power button if it has one.
3. Connect a computer or mobile device to the Nighthawk AX6 network. You can do this by either connecting to the Wi-Fi network name (SSID) and entering the password printed on the router, or by connecting an Ethernet cable from the computer to any of the LAN ports on the back of the router.
4. Launch a web browser on the connected device and enter "http://www.routerlogin.net" (without quotes) or the IP address "192.168.1.1" into the address bar. Press Enter.
5. You will be prompted to log in with your router's administrator credentials. The default username is usually "admin" and the default password is "password". If you have changed these credentials before, use the updated login details.
6. Follow the on-screen instructions to complete the setup process, including selecting your internet service provider (ISP) and entering any required login details provided by your ISP, such as a username and password.
7. You will have the option to change the default username and password for accessing the router's settings. It is highly recommended to change these credentials for security reasons.
8. Once the setup is complete, you can customize your network settings, including Wi-Fi network name (SSID) and password, wireless security settings, and other advanced features, as desired.
Note: It is recommended to consult the user manual or visit the Netgear support website for detailed instructions specific to your Nighthawk AX6 model, as steps may vary slightly.

The default admin password for the Netgear Nighthawk AX6 router is usually "password". However, if you have changed the password previously and cannot recall it, you may need to perform a factory reset on the router to restore the default settings, including the password.