MSi OPTIX-MAG341CQ user manual

Follow the steps listed below to set up your MSI monitor on the stand:
1. Unbox the monitor carefully and put the parts on a clean, flat surface.
2. Identify all parts you've got. Usually, you should have a monitor, a stand, a base and some screws.
3. Take the base of the stand and slot it into the stand neck. It should fit only one way. Once they're slotted together, use the screws provided to securely fasten the base to the stand neck. To do this, you might need a screwdriver.
4. Locate the connection area on the back of the monitor. Notice a rectangular part with screw holes.
5. Align the stand neck to this area on the monitor. Depending on the design, you may need to slide the stand up into the monitor until it clicks in place or might need to position it against the monitor and secure it with screws.
6. Once the stand is securely attached to the monitor, you can position it on your desk or wherever you want to use it.
7. Adjust the viewing angle to your comfort.
Remember to take care while doing this process. The monitor's screen is fragile and can be easily scratched or damaged. If the monitor is large or heavy, you might want to have someone help you. Carefully read through any provided manual before starting.
If you encountered any difficulties, don't hesitate to contact MSI customer support.

The MSI Optix MAG341CQ has a maximum brightness of 250 nits.

To turn on the MSI Optix G241 monitor, follow these steps:
1. Make sure the monitor is properly connected to your computer using the provided display cable (such as HDMI or DisplayPort).
. Locate the power button on the bottom-right corner or the back of the monitor.
3. Press and hold the power button for a few seconds until the monitor powers on.
4. Once the monitor is turned on, you should see the MSI logo or a display signal from your computer.
If the monitor doesn't turn on, ensure that it is plugged into a power source and the power cable is securely connected. If the issue persists, consult the monitor's user manual or contact MSI support for further assistance.

To open the menu on your MSI Optix monitor, you can follow the steps below:
1. Locate the physical buttons on the bottom or side of your monitor. These buttons are typically located under the screen or on the sides of the monitor.
. Press the "Menu" button – this is usually indicated by a small icon or the word "Menu" written next to the button.
3. Use the navigation buttons (either arrow buttons or a joystick) to navigate through the menu options.
4. Press the corresponding button (usually represented by an icon or labeled) to select a particular menu option.
5. Use the navigation buttons to make adjustments or changes within each menu option.
6. Press the "Menu" button again to exit the menu and save any changes you made.
Please note that the exact button locations and menu navigation may vary slightly depending on the specific model of your MSI Optix monitor.