MSi OPTIX-G273 user manual

1. Power on your monitor. If it's already on, turn it off and turn it back on to reset the system.
2. Locate the "JOYSTICK BUTTON". It is usually on the back of the monitor towards the right side. You'll feel a small joystick that you can push in different directions or press.
3. Push the joystick button to bring up the OSD (On-Screen Display). It will show various options like settings, input source, and more.
4. If you want to change the settings, push the joystick to the right to select the settings.
5. Once in the settings menu, use the joystick to navigate to the specific settings you want to change - brightness, contrast, color, gaming settings, etc.
6. Push the joystick to select the setting you want to change. Use the joystick to adjust the level up or down.
7. Once you've made the change, press the joystick to set it.
8. Push the joystick to the left to go back or press it to exit the setting.
9. Repeat steps 4-8 to change additional settings. Once you are done, you can simply leave the OSD and it should automatically disappear after a few seconds.
10. If you want to reset or exit the system, just push the joystick to the left or press it.
Please note, the settings may vary from model to model. If the above steps do not work, check your user manual or contact the MSI customer support service.

Changing the Red-Green-Blue (RGB) balance in your MSI monitor can help you optimize your screen for comfortable and accurate color viewing. Follow these steps:
1. First, right-click on your desktop and select "Display Settings."
. Scroll below and click on the "Advanced display settings".
3. Pick the display (if you have more than one) for which you would like to change settings.
4. Click on "Display adapter properties for Display 1". A new window will open.
5. Go to the "Color Management" tab.
6. Click on the "Color Management" button.
7. In the new window, tick the "Use my settings for this device" checkbox.
8. Under "Profiles associated with this device," click on the "Add" button.
9. A list will appear with many different color profiles. Pick the appropriate RGB profile that you want to use and click "OK."
10. Now in the "Color Management" window, sets the new profile as a default profile by clicking "Set as Default Profile."
11. Click "Close" on all windows.
Remember, these instructions are specific to Windows 10, and the specific steps and menus might differ somewhat if you are using another operating system.
Furthermore, some MSI monitors come with an application called the "Gaming OSD App" that allows you to control the color settings and modes directly on your monitor. If this applies to your model, download the app and adjust the RGB settings directly on the monitor.

No, the MSI Optix G273 does not have built-in speakers. However, it does have a headphone out jack to connect external speakers or headphones.

To access the menu on your MSI Optix G273 monitor, follow these steps:
1. Locate the physical buttons on the monitor. These buttons are usually found underneath the bottom bezel or on the side of the monitor.
2. Press the "Menu" button to enter the OSD (On-Screen Display) menu.
3. Once you have entered the menu, you can navigate through the options using the directional buttons (usually located next to the "Menu" button). These buttons typically allow you to move up, down, left, or right within the menu.
4. To select a specific option or make changes, use the "Enter" or "OK" button.
5. To exit the menu, either press the "Menu" button again or wait for the menu to automatically close after a period of inactivity.
Remember that the exact button layout and menu interface might vary slightly depending on the specific model of your Optix G273 monitor, but this general approach should apply to most MSI monitors.