Motorola S10-HD user manual

The Motorola S10-HD earpiece typically takes about 2-3 hours to fully charge.

To pair your Motorola S10-HD with a device, follow the steps below:
1. First, make sure the headphones are either turned off or in pairing mode. If they are on, turn them off by pressing and holding the Call button until the indicator light turns off. To put them into pairing mode, press and hold the Call button until the LED indicator light flashes in red and blue.
2. On the device you want to pair with, ensure its Bluetooth is enabled and in discoverable mode. Consult the device's user manual for specific instructions on how to activate Bluetooth and make it discoverable.
3. On your device, go to the Bluetooth settings menu and search for available devices. The steps to access this menu vary depending on the device, but typically, you can find it under "Settings" > "Connections" > "Bluetooth" or a similar pathway.
4. On your device's Bluetooth menu, look for "S10-HD" or a similar name. When you see it, select it to initiate the pairing process.
5. Once the pairing process is complete, you should hear a tone or a voice prompt from the headphones indicating successful connection. The LED indicator on the headphones may also turn solid blue.
Your Motorola S10-HD headphones should now be successfully paired with your device. You can test the connection by playing audio or making a phone call. If the connection fails, repeat the steps above and make sure both devices are close to each other during the pairing process.