Motorola COMFORT-CONNECT-85 user manual

The lights on your Motorola Comfort Connect-85 baby monitor provide important information about what's happening.
1. Power Indicator Light: If this light is on, it means the parent unit is connected to the power supply and charging. If it's flashing, it means the battery power is low.
2. Video ON/OFF Indicator light: This light will be on when the video is activated and will be off when the video is deactivated.
3. Link Indicator Light: When the link light is green, it means the baby and parent units are connected. If the link light is red or off, that means they are not connected.
4. Sound Level Indicator Lights: These are on the baby unit. They will illuminate to indicate the level of sound in the baby's room.
Please ensure to refer to your user manual of the particular model since each model can vary slightly.

The blue light on a Motorola baby monitor typically indicates that the monitor is powered on and functioning properly. It could also represent that the monitor is in standby mode or ready for use. The exact meaning of the blue light can vary depending on the specific model and features of the baby monitor, so it is recommended to refer to the user manual for more detailed information.

To connect your Motorola Comfort-Connect-85 camera to Wi-Fi, you can follow these steps:
1. Power on your camera and make sure it is in setup mode. This is usually indicated by a blinking LED or a voice prompt.
2. Download and install the "Hubble for Motorola Monitors" app on your smartphone or tablet from the App Store or Google Play Store.
3. Launch the app and create an account if you don't have one already. Sign in to the app using your account credentials.
4. Once signed in, tap on the "+" or "Add Device" button to begin the camera setup process.
5. On the camera, press the Wi-Fi button (or WPS button if available) to enable the Wi-Fi setup mode. The LED on the camera should start flashing.
6. In the app, select your camera model from the list of available devices. Make sure your smartphone or tablet is connected to your home Wi-Fi network, as it will be used to transfer the Wi-Fi credentials to the camera.
7. Follow the on-screen instructions in the app to input your Wi-Fi network name (SSID) and password. This information will be sent to the camera to establish the connection.
8. Wait for the camera to connect to your Wi-Fi network. This process may take a minute or two. The LED on the camera should become steady or turn off once the connection is established.
9. Once connected, the app should display a live view from your camera, indicating a successful Wi-Fi connection.
Note: It is worth mentioning that the exact steps may vary slightly depending on the specific model of your Motorola Comfort-Connect-85 camera and the version of the app you are using. It is recommended to consult the camera's user manual or refer to the app's instructions for more detailed information if needed.