Maytag MVW6230HW user manual

Yes, the Maytag MVW6230HW washer does have an agitator.

The average life expectancy of a Maytag washer can vary depending on factors such as usage, maintenance, and model. However, on average, a Maytag washer can last anywhere from 10 to 15 years. With proper care and maintenance, some models can even last longer than that. It's important to follow the manufacturer's instructions for maintenance and troubleshoot any issues promptly to ensure the appliance's longevity.

Some common problems on a Maytag washing machine include:
1. Noisy operation: This could be due to a faulty pump, worn-out bearings, or an issue with the transmission.
2. Leaking: Leaks can occur from various parts such as the hoses, tub, or detergent dispenser. Faulty seals or damaged components may be the cause.
3. Failure to start: If the machine does not start or respond when the start button is pressed, it could be due to a malfunctioning control board, door latch, or timer.
4. Failure to spin or agitate: This issue may be caused by a malfunctioning drive belt, transmission, or motor coupler. In some cases, an unbalanced load can also prevent proper spinning.
5. Not draining properly: A clogged or faulty drain pump, drain hose, or a defective lid switch can lead to improper draining. This could result in water remaining in the tub after a wash cycle.
6. Overfilling or underfilling: Problems with the water inlet valve or pressure switch can cause the machine to fill with too much or too little water.
7. Excessive vibration or shaking: If the machine vibrates excessively during operation, it may indicate a problem with the leveling legs, shock absorbers, or tub springs.
8. Error codes: Various error codes may appear on the control panel, indicating specific malfunctions that need to be addressed. These codes can range from simple issues like a door lock error to more complex problems.
It's important to note that the specific issues can vary depending on the model and age of the Maytag washing machine. If you are experiencing problems with your machine, it is advisable to consult the user manual or contact Maytag customer support for assistance.