Maytag MDB4949SDZ user manual

Yes, the Maytag MDB4949SDZ dishwasher model does have a reset button. The location of the reset button may vary depending on the specific model, but it is typically located on the control panel. Refer to the dishwasher's user manual for exact instructions on how to use the reset button.

The location of the filter on a Maytag dishwasher may vary depending on the specific model. However, in most Maytag dishwashers, the filter is typically located at the bottom of the dishwasher tub, near the back wall. It is generally a cylindrical or rectangular-shaped component that can be unscrewed or disassembled for cleaning. It is important to consult the dishwasher's user manual or check the manufacturer's website for specific instructions and diagrams for your particular dishwasher model.

There could be several reasons why your Maytag dishwasher is not starting. Some possible causes and solutions include:
1. Power supply: Ensure that the dishwasher is properly connected to a power source and that the circuit breaker for the dishwasher is not tripped. Test the outlet by plugging in another appliance to confirm if it is functional.
2. Door latch: Check if the dishwasher door is closed securely. If the door latch is not engaged properly, the dishwasher will not start. Clean the latch to remove any debris or dirt that may be preventing it from fully closing.
3. Controls and settings: Make sure that the dishwasher controls and settings are properly selected. Look for any error codes or indicators on the control panel that may be preventing it from starting. If necessary, consult the dishwasher's manual for troubleshooting instructions.
4. Water supply: Verify that the water supply is turned on and the water inlet valve is not clogged. If there is no water flowing into the dishwasher, it will not start. Check the water supply line for any kinks or obstructions.
5. Faulty components: If none of the above solutions work, it is possible that there is a malfunction with certain dishwasher components such as the motor, timer, or control board. In this case, it may be necessary to contact a professional technician for further inspection and repair.