Marantz SR7013 user manual

Virtual on Marantz refers to the tech features known as Dolby Atmos Height Virtualization Technology and DTS Virtual:X processing. These technologies aim to simulate an immersive audio experience in a home theater setup without the need for additional overhead or height speakers. It creates virtual sound effects which give the illusion of sound coming from different directions. For example, it can make sound seem like it's coming from above or from specific sides, enhancing the immersive experience of the audio.

To reset your Marantz SR7013 receiver, you can follow these steps:
1. Press the "Power" button on the front panel to turn the receiver off.
. Press and hold the "Source Select" and "Zone 2 Source" buttons simultaneously on the front panel.
3. While still holding the buttons, press the "Power" button once to turn the receiver back on.
4. Continue holding the "Source Select" and "Zone 2 Source" buttons until "Initialization" appears on the front panel display.
5. Release the buttons and wait for the receiver to complete the reset process. It might take a couple of minutes.
6. Once the reset is complete, the receiver will turn off and then turn back on automatically.
7. The receiver is now reset, and you can set it up again from scratch.
Note: Resetting your Marantz SR7013 will erase all of your custom settings and configurations, so make sure to backup any important settings or configurations beforehand if needed.

The Marantz SR7015 AV receiver is specified to provide up to 125 watts of power per channel (with 8 ohm speakers, 20 Hz - 20 kHz, 0.05% THD, 2 channel driven).

There could be a few reasons why your Marantz SR7015 receiver has no sound:
1. Check your speaker connections: Make sure your speakers are properly connected to the receiver. Ensure that the speaker wires are securely attached to the appropriate speaker terminals and that there are no loose connections.
2. Verify the input source: Ensure that the correct input source is selected on the receiver. Use the remote control or front panel display to choose the appropriate input source.
3. Check the volume level: Make sure the volume is turned up on both the receiver and any connected devices, such as a TV or media player.
4. Confirm the speaker settings: Check the speaker settings on the receiver's menu. Make sure the speakers are set to the correct configuration, such as stereo or surround sound, and that the settings match your speaker setup.
5. Test multiple audio sources: Try connecting different devices, such as a CD player, Blu-ray player, or a different TV, to the receiver to determine if the issue is with a specific source device.
6. Reset the receiver: If all else fails, you can try resetting the receiver to its factory defaults. Consult the user manual or Marantz support for specific instructions on how to perform a reset.
If none of these solutions work, it may be best to contact Marantz customer support or seek professional assistance to diagnose and resolve the issue.