Magnavox MC345 user manual

The Magnavox MC345 is not a universal remote. It is a VCR/DVD player combo and does not have the capability to control other devices.

Programming a universal remote without a code may vary depending on the specific model and brand. Here are some general steps that might help:
1. Turn on the device you want to control with the universal remote.
. Press and hold down the "Setup" or "Code Search" button on the universal remote until the LED light indicator turns on (usually for about 3-5 seconds).
3. While keeping the setup or code search button pressed, enter a series of numbers (e.g., 9-9-1 or 9-9-9), or a specific button combination mentioned in the user manual. The LED light should remain on during this process.
4. Aim the universal remote at the device and slowly press the "Power" button repeatedly until the device turns off. This may take several attempts with different codes or combinations.
5. Once the device turns off, quickly press the "Setup" button to lock in the code. The LED light should turn off to indicate a successful pairing.
6. Test the remote by pressing different buttons to verify if all the functions control the device properly. If not, repeat the process using alternate codes or combinations provided by the manufacturer.
If these steps don't work, it's recommended to consult the user manual of the specific universal remote model or reach out to the manufacturer's customer support for further assistance.

The universal remote code for Magnavox devices can vary depending on the brand and model of the universal remote control you are using. To find the specific code for your universal remote control, you can refer to the user manual or visit the manufacturer's website for a list of codes. Additionally, some universal remotes have a code search feature which allows you to find the correct code by manually going through the remote's database.