Logitech PEBBLE-M350 user manual

There may be a few ways to check the battery level of your Logitech Pebble M350:
1. Using Logitech Software: If you have Logitech's official software (Logitech Options) installed on your device, you can use it to check the battery level of your mouse. Open the software, click on the image of the Pebble M350, and look for the battery level indicator.
2. Using Device's OS Settings: On Windows, go to Settings > Devices > Mouse & touchpad. The battery status will also appear there. On macOS, select System Preferences > Mouse where you will find the battery level.
3. LED Indicator: Some Logitech mouse models have an LED indicator that will change color or flash when the battery is low. However, the Pebble M350 doesn't have this feature.
Please note that various factors can affect these methods' accuracy, including your device's model, the type of battery used, and its age and condition. So, the remaining battery life might not always be precise.

The blue light on your Logitech Pebble M350 wireless mouse typically blinks to indicate that the mouse is in pairing mode and is attempting to establish a connection with your computer or device. It may blink rapidly or slowly, depending on the specific mode it is in.
If you just turned on your mouse or if you are trying to pair it with a different device, the blue light will blink rapidly to indicate that it is ready to pair. In this mode, you can usually find your mouse in the Bluetooth settings of your computer or device and complete the pairing process.
If the blue light is blinking slowly, it means that the mouse is already paired with a device and is in standby mode, waiting for a connection to be established. Moving or clicking the mouse should wake it up and establish a connection with the paired device. You can also press any button on the mouse to bring it out of standby mode.
In case the blue light continues to blink or you are experiencing connection issues, it is recommended to refer to the user manual of your specific mouse model or visit the Logitech support website for further troubleshooting steps.

There could be several reasons why your Logitech Pebble mouse is not working properly. Here are a few troubleshooting steps you can try:
1. Make sure that the mouse is turned on and the battery is not drained. If it is a wireless mouse, check that it is properly paired with the receiver.
2. Clean the mouse sensor and the surface it is being used on. Dust and dirt can interfere with the mouse's tracking ability.
3. Check the USB port and cable connection if you are using a wired mouse. Ensure that the cable is not damaged and the port is working properly.
4. Update the mouse driver software. Visit the official Logitech website and download the latest driver for your specific mouse model. Install it and see if it resolves the issue.
5. Test the mouse on a different computer to determine if the problem is specific to your system. If it works properly on another computer, it could indicate compatibility or driver-related issues on your original device.
6. If none of the above steps work, try resetting the mouse. Look for a reset button on the bottom or back of the mouse and press it with a paperclip or a similar tool. Follow the manufacturer's instructions for resetting the mouse.
If the problem persists after trying these steps, it may indicate a hardware issue with the mouse. In that case, it might be best to contact Logitech customer support for further assistance or consider replacing the mouse if it is under warranty.

The blue light blinking on your Logitech Pebble M350 mouse indicates that the battery power is low and needs to be recharged. You can charge the mouse using the included USB cable by plugging it into a computer or a USB power source. Once fully charged, the blue light should stop blinking.