Logitech MX-MASTER-2S user manual

The middle button on the Logitech MX Master 2S is a clickable scroll wheel. It can be rotated for vertical scrolling and also has the ability to scroll horizontally by tilting it to the left or right. Additionally, pressing down on the middle button can be used for various functions, such as switching between applications or opening the start menu, depending on your device's settings and configuration.

Yes, the Logitech MX Master 2S has been discontinued by the manufacturer, Logitech, and is succeeded by newer models such as the MX Master 3. However, it may still be available for purchase through various third-party retailers.

To pair your Logitech MX 2 Bluetooth mouse, follow these steps:
1. Check if your computer or device has Bluetooth capabilities. If not, you may need to use a Bluetooth dongle to add the functionality.
2. Turn on the Bluetooth feature on your computer or device. Usually, you can do this by going to the Settings or Control Panel and finding the Bluetooth section.
3. On your MX 2 mouse, make sure it is turned on and the battery is not low.
4. Put the MX 2 mouse in pairing mode by pressing and holding the Easy-Switch button located beneath the mouse for about 3 seconds. The LED light should start blinking rapidly, indicating it is in pairing mode.
5. On your computer or device, search for Bluetooth devices available for pairing. This step may vary depending on your operating system. Look for "Bluetooth Settings," "Devices," or a similar option.
6. Once the Logitech MX 2 mouse appears in the list of available devices, click on it to begin the pairing process.
7. Your computer or device may ask for a PIN or passkey to complete the pairing. If prompted, enter "0000" as the PIN. However, some devices may not require this step.
8. After successfully pairing, the LED light on the MX 2 mouse will stop blinking and become solid, indicating it is connected.
9. Test the mouse by moving it around to ensure it is functioning properly.
Note: If you encounter any issues during the pairing process, consult the Logitech support website or refer to the user manual for further instructions specific to your mouse model.

To reset your Logitech MX Master 2S mouse, follow these steps:
1. Turn off the mouse by sliding the power switch located on the bottom of the device to the "Off" position.
. Locate the Reset button on the bottom of the mouse. It is a small hole with the word "Reset" written next to it.
3. Using a paperclip or a similar thin object, gently press and hold the Reset button for about 10 seconds.
4. Release the Reset button.
5. Turn on the mouse by sliding the power switch to the "On" position.
6. The mouse will reconnect with the paired computer, and the reset process will be complete.
Note: Resetting the mouse will remove any custom settings or configurations you have made. After resetting, you may need to reconfigure the mouse using Logitech's software or re-pair it with your computer if necessary.