Logitech MX-ANYWHERE-2S user manual

The Logitech MX Anywhere 2 mouse does not have a specific battery status indicator to show when it is fully charged. However, you can check the battery level of the mouse by using the Logitech Options software, which is available for Windows and macOS.
1. Download and install the Logitech Options software from the Logitech website.
. Connect your MX Anywhere 2 mouse to your computer via the USB charging cable.
3. Open the Logitech Options software.
4. In the Logitech Options menu, click on your MX Anywhere 2 mouse.
5. Look for the battery level indicator, which should provide an estimate of the remaining battery charge.
Please note that the software will show an estimate and not an exact percentage, but it should give you a rough idea of the battery level.

The Logitech MX Anywhere 2S mouse has several buttons that provide additional functionality:
1. Left and Right Buttons: Standard left and right-click buttons for basic navigation.
. Scroll Wheel: The scrolling wheel can be used to scroll up and down on a page.
3. Middle Button: The middle button can be used for various functions such as opening links in a new tab or closing tabs, depending on the user's settings.
4. Back and Forward Buttons: These buttons are typically located on the left side of the mouse and can be used for navigating backward and forward between webpages or documents.
5. Gesture Button: Located beneath the scroll wheel, the gesture button allows users to perform custom actions such as launching applications or executing specific commands using gesture movements.
6. DPI Switching Buttons: The mouse also features dpi (dots per inch) switching buttons, which let users change the sensitivity or speed of cursor movement on the screen.
These buttons can be customized and programmed using Logitech's software, allowing users to assign specific functions or shortcuts to each button based on their preferences and needs.

To pair your Logitech MX 2 Bluetooth mouse, follow these steps:
1. Check if your computer or device has Bluetooth capabilities. If not, you may need to use a Bluetooth dongle to add the functionality.
2. Turn on the Bluetooth feature on your computer or device. Usually, you can do this by going to the Settings or Control Panel and finding the Bluetooth section.
3. On your MX 2 mouse, make sure it is turned on and the battery is not low.
4. Put the MX 2 mouse in pairing mode by pressing and holding the Easy-Switch button located beneath the mouse for about 3 seconds. The LED light should start blinking rapidly, indicating it is in pairing mode.
5. On your computer or device, search for Bluetooth devices available for pairing. This step may vary depending on your operating system. Look for "Bluetooth Settings," "Devices," or a similar option.
6. Once the Logitech MX 2 mouse appears in the list of available devices, click on it to begin the pairing process.
7. Your computer or device may ask for a PIN or passkey to complete the pairing. If prompted, enter "0000" as the PIN. However, some devices may not require this step.
8. After successfully pairing, the LED light on the MX 2 mouse will stop blinking and become solid, indicating it is connected.
9. Test the mouse by moving it around to ensure it is functioning properly.
Note: If you encounter any issues during the pairing process, consult the Logitech support website or refer to the user manual for further instructions specific to your mouse model.