Logitech HARMONY-ULTIMATE user manual

To set up your Logitech Harmony Ultimate, follow these steps:
1. Download and install the Logitech Harmony software from the Logitech website onto your computer.
2. Connect the Harmony Ultimate charging cradle to your computer using the provided USB cable.
3. Launch the Harmony software and create a new account if required.
4. Follow the on-screen instructions to set up your Harmony Ultimate remote. It will guide you through steps such as entering the make and model numbers of your devices.
5. After entering your devices, the software will prompt you to set up activities. Activities are actions you perform with your devices, such as "Watch TV" or "Play a Game." For each activity, the software will guide you to select the devices involved and how they should be controlled.
6. Once you have set up all your activities, you can customize the buttons and commands on the remote according to your preferences.
7. After customization, connect the Harmony Ultimate to the charging cradle using the included USB cable to sync the remote with your setup.
8. Lastly, disconnect the remote from the charging cradle and your setup is ready to use.
Note: It's essential to ensure that all the devices you want to control are in line-of-sight of the Harmony Ultimate or within the range of any necessary IR blasters. This will ensure seamless control of your home entertainment devices.

To resync your Logitech Harmony Ultimate remote, you can follow these steps:
1. Firstly, remove the battery cover from the back of your remote.
. Locate the sync button, typically located near the bottom-right corner of the battery compartment.
3. Press and hold the sync button for approximately 10 seconds until you see a message on the remote's screen indicating it is in sync mode.
4. On your computer or mobile device, launch the Harmony Remote software or Harmony mobile app.
5. Go to the Devices section, select your Harmony Ultimate remote, and click on Sync.
6. Follow the on-screen prompts to complete the synchronization process. Make sure the remote is within range of the device you are syncing with.
7. Once the synchronization is complete, the remote will restart and you can reattach the battery cover.
Your Logitech Harmony Ultimate remote should now be successfully resynced and ready for use again.

Yes, Logitech Harmony Ultimate has been discontinued. Logitech announced in 2020 that they would be discontinuing their entire Harmony remote lineup, including the Harmony Ultimate. However, existing Harmony remotes will continue to be supported and receive updates from Logitech.

To connect your Logitech Harmony Ultimate to Wi-Fi, follow these steps:
1. Ensure your Harmony Ultimate remote is powered on and in setup mode.
. Download and open the Harmony app on your smartphone or tablet.
3. Tap on "Set up new hub" or "Add device" within the app.
4. Choose Harmony Hub as your device type.
5. The app will search for nearby Harmony Hubs. Once it finds yours, tap on it to proceed.
6. The app will display a Wi-Fi network selection screen. Choose your home Wi-Fi network from the list.
7. Enter your Wi-Fi network password if prompted.
8. The app will attempt to connect your Harmony Hub to the chosen Wi-Fi network. Wait for the process to complete.
9. Once connected, you can further customize and configure your Harmony Hub using the app.
Note: Make sure your Harmony Hub is located within range of your Wi-Fi router for a stable connection. Additionally, keep in mind that the Harmony Ultimate remote doesn't connect directly to Wi-Fi but communicates with the Harmony Hub, which then connects to the Wi-Fi network.