Logik L612WM16 user manual

To empty a Logik washing machine, you can follow these steps:
1. Turn off and unplug the washing machine from the power supply to ensure safety.
. Locate the drainage hose at the back of the machine. It is usually located near the bottom and has a cap or plug.
3. Place a shallow container, such as a shallow basin or bucket, near the machine to collect the water.
4. Unscrew or remove the cap/plug from the drainage hose carefully. Be prepared for water to flow out once it is opened.
5. Allow the water to drain completely into the collection container.
6. Once the water has drained, close the cap/plug tightly to prevent any leakage.
7. If there is still water left in the machine, you can try using the machine's drain function. Refer to the Logik washing machine manual for instructions on how to activate this function.
8. After draining all the water, ensure that the drainage hose is securely closed to avoid any water leakage.
9. You can now move and empty the collected water from the container to a suitable drain or sink.
It is important to remember that if you are experiencing any issues with your washing machine or are unsure about emptying it, it is best to consult the manufacturer's manual or contact Logik customer support for specific instructions.

There could be several reasons why your Logik washing machine is not spinning fast:
1. Load imbalance: If the load inside the drum is not distributed evenly, it can cause the machine to spin at a slower speed. Make sure to distribute the clothes evenly in the drum before starting the cycle.
2. Overloading: If you have overloaded the machine with too many clothes, it can put strain on the motor, leading to slower spinning. Try reducing the load and see if it improves the spin speed.
3. Belt issues: The drive belt in the washing machine may be worn out or loose, causing the drum to spin slower than usual. Check the belt for any signs of damage or looseness, and replace it if necessary.
4. Motor problems: There might be an issue with the motor itself, such as a faulty motor capacitor or motor brushes. In this case, you may need to contact a technician to diagnose and repair the motor problem.
5. Electronic control board issues: If the control board is malfunctioning, it can affect the speed at which the drum spins. Again, it would be best to seek professional help to check and repair any problems with the control board.
It is recommended to consult the user manual for specific troubleshooting steps related to your Logik washing machine model.

In a Logik washing machine, typically the detergent should be placed in the detergent dispenser drawer. The detergent dispenser drawer is usually located on the top left or top right side of the washing machine's control panel. It consists of separate compartments for the main wash, pre-wash, and fabric conditioner. Each compartment is labeled accordingly. Simply pour the appropriate amount of detergent into the desired compartment as per the manufacturer's instructions and program the machine accordingly.

The Logik L612WM16 is a washing machine with a capacity of 6.2 kilograms.