LG LP1017WSR user manual

There can be several reasons why your LG portable AC may not be turning on. Here are a few troubleshooting steps you can try:
1. Check the power source: Make sure the unit is properly plugged into a working electrical outlet. Also, check if the outlet is receiving power by plugging in another device.
2. Power supply issues: Ensure that the AC's power cord is securely connected to the unit and not damaged. If the cord is damaged, it may need to be replaced.
3. Reset the unit: Sometimes, a power reset can fix the issue. Turn off the AC, unplug it from the power source, and wait for 5-10 minutes before plugging it back in and turning it on again.
4. Check the control settings: Ensure that the temperature is set lower than the current room temperature. Also, confirm that the AC is set to the correct mode (cooling, fan, or dehumidification) and the fan speed is appropriately selected.
5. Clean the air filters: Clogged or dirty air filters can prevent the AC from turning on. Remove the filters, clean them according to the manufacturer's instructions, and reinsert them into the unit.
6. Check the remote control: If you are using a remote control to operate the AC, check if the batteries are working correctly. Replace the batteries if needed.
If none of these steps resolve the issue, it is recommended to contact LG customer support or refer to the product manual for further assistance.

The cool mode on an LG air conditioner is designed to provide cooling by lowering the temperature of the room. It works by removing excess heat from the indoor environment and releasing it outside.
On the other hand, the dry mode is specifically designed for reducing the humidity levels in the room without significantly affecting the temperature. In this mode, the air conditioner runs at a slightly higher temperature than the cool mode, and the fan speed is set to a lower level. It primarily focuses on extracting moisture from the air, which can help make the room feel more comfortable during humid conditions.
So, the main difference between cool and dry mode is that the cool mode primarily focuses on cooling the room, while the dry mode is specifically designed for reducing humidity levels.

The dry mode on the LG LP1017WSR split AC is designed to reduce the humidity in the room without significantly cooling the air. When you activate the dry mode, the AC will run the compressor at a low speed to remove excess moisture from the air, making the room feel dryer and more comfortable. This mode is especially useful in humid climates or during rainy seasons when the air feels muggy.