LG BP350 user manual

To set up your LG BP350 Blu-ray player, follow these steps:
1. Unbox the LG BP350 and locate all the necessary cables and accessories.
. Connect the player to your TV using an HDMI cable. Plug one end of the cable into the HDMI output port on the player and the other end into an available HDMI input port on your TV.
3. If you want to connect the player to the internet, use an Ethernet cable to connect the player to your router. Alternatively, you can set up a wireless connection by going to the Network Settings in the player's menu.
4. Insert batteries into the remote control.
5. Power on both the Blu-ray player and the TV.
6. Use the TV remote to navigate to the correct HDMI input that your player is connected to.
7. On the LG BP350 remote control, press the Home button to access the main menu.
8. Use the arrow buttons on the remote to navigate through the menu options and press the OK/Enter button in the center to make a selection.
9. Follow the on-screen prompts to select your language, set up your network connection, and configure any other desired settings.
10. Once you have completed the setup process, you can insert a Blu-ray disc into the player and enjoy your favorite movies.
Note: The steps may vary slightly depending on your specific model's firmware and menu layout. Please refer to the user manual that came with your LG BP350 for detailed instructions.

The LG BP350 is a Blu-ray disc player and does not have the ability to install or run apps. It is primarily used for playing Blu-ray discs, DVDs, and audio CDs. It also provides the ability to stream content from select online platforms such as Netflix, Hulu, and YouTube with the help of built-in Wi-Fi connectivity. However, these streaming services are pre-installed and cannot be extended to include additional apps.

No, the LG BP350 is not a multi-region Blu-Ray and DVD player. It is designed to play discs from the region it is intended for.

To connect your LG BP350 to WiFi, follow these steps:
1. Power on your LG BP350 and wait for it to load.
. Press the Home button on the remote control to access the Home menu.
3. Navigate to the "Settings" option using the arrow keys on the remote and press the OK button.
4. In the Settings menu, highlight and select the "Network" option.
5. Choose the "WiFi" option to set up a wireless connection.
6. The player will scan for available WiFi networks. Select your network from the list and press the OK button.
7. If your network is password protected, a keyboard will appear on the screen. Use the remote to enter your WiFi password. Use the arrow keys to select each character and the OK button to confirm.
8. Once you have entered the correct password, press the OK button to connect the player to your WiFi network.
9. The player will attempt to establish a connection with the network. Once successfully connected, a confirmation message will be displayed on the screen.
Note: Make sure you have a stable WiFi signal and that your network is working properly before attempting to connect the LG BP350 to WiFi.