KitchenAid ARCHITECT-KCMS1655BSS user manual

To bake in a KitchenAid convection microwave, follow these steps:
1. Preheat the convection microwave: Press the 'Convection' or 'Convection Bake' button and set the desired temperature. The microwave will preheat to the set temperature.
2. Prepare the food: Place the food to be baked in a microwave-safe baking dish or on a microwave-safe baking tray. Make sure to use the appropriate cookware as per the manufacturer's guidelines.
3. Adjust the cooking time and temperature: Select the 'Bake' or 'Convection Bake' function and set the desired cooking time and temperature. Follow the recipe instructions or adjust as needed.
4. Place the food in the convection microwave: Put the food in the preheated convection microwave and close the door.
5. Monitor the cooking process: Keep an eye on the food throughout the baking process to prevent overcooking. Consider rotating the dish halfway through cooking to ensure even browning.
6. Use the convection setting: The convection setting uses the internal fan to circulate hot air, resulting in more even and faster cooking. Ensure this setting is properly activated for baking.
7. Check for doneness: Use a toothpick or cake tester to check if the food is fully cooked. If the toothpick comes out clean, it is done. If not, continue baking for additional time.
8. Remove and let it cool: Once the food is fully baked, turn off the microwave and carefully remove the dish using oven mitts or heat-resistant gloves. Allow the food to cool for a few minutes before serving.
Note: It is crucial to refer to the manufacturer's instructions and user manual for accurate baking procedures specific to your KitchenAid convection microwave model.

On a KitchenAid microwave, including the architect-kcms1655bss model, the model number is typically located on the interior of the microwave. Open the microwave door and look for a label or sticker on the left or right side wall, or on the back wall. The label should have the model number printed on it.

There could be several reasons why the KitchenAid microwave display is not working. Here are a few common troubleshooting steps you can try:
1. Check the power supply: Ensure that the microwave is properly plugged into a functioning power outlet and that the outlet is receiving power. You can test the outlet by plugging in another device to see if it works.
2. Reset the microwave: Sometimes, a simple reset can fix display issues. Unplug the microwave from the power source for a few minutes, then plug it back in and see if the display starts working.
3. Check the circuit breaker: If the microwave is connected to a circuit, check if the circuit breaker has tripped. Resetting the circuit breaker may restore power to the microwave.
4. Test the microwave's settings: If the display is not working but other functions of the microwave are still operational, it might be an issue with the display panel itself. Try using the microwave's features by inputting the time and starting a cooking program to see if the microwave is still functioning properly, aside from the display.
5. Seek professional help: If none of the above steps work, it could be a sign of a more serious issue with the microwave's internal components. It would be advisable to contact KitchenAid customer service or a professional appliance repair technician to diagnose and fix the problem.