Kenwood KMR-M328BT user manual

To connect your Kenwood remote app to your KMR-M328BT receiver, follow these steps:
1. Download the Kenwood Remote app onto your smartphone or tablet from the App Store (for iOS) or Google Play Store (for Android).
. Make sure your smartphone or tablet is connected to the same Wi-Fi network as your KMR-M328BT receiver.
3. Power on your KMR-M328BT receiver and ensure Bluetooth is activated on your device.
4. Launch the Kenwood Remote app on your smartphone or tablet.
5. On the Kenwood Remote app, tap on the 3-line menu button, usually located at the top left corner of the screen.
6. Select "Settings" or "Setup" from the menu options.
7. In the settings menu, tap on "Wi-Fi" or "Network" to access the network settings.
8. Select your KMR-M328BT receiver from the list of available devices.
9. If prompted, enter the password for your receiver (the default password is usually "0000").
10. Once connected, you will be able to control your KMR-M328BT receiver through the Kenwood Remote app on your smartphone or tablet. You can adjust volume, change music sources, select radio stations, and more.
Note: The exact steps may vary slightly depending on the version of the Kenwood Remote app and the operating system of your device.

To factory reset the Kenwood KMM-BT328U, follow these steps:
1. Turn on your device.
. Press and hold the "SRC" (Source) button for a few seconds until the unit powers off.
3. While keeping the "SRC" button pressed, simultaneously press and hold the "RESET" button with a thin object like a pen tip or paperclip. The reset button is a small hole usually located on the front or back of the device.
4. Hold both buttons until the unit powers back on. You may release the buttons once you see the Kenwood logo appear on the screen.
5. The unit will now be reset to its factory settings.
Please note that this reset will erase all saved settings, configurations, and paired devices on your Kenwood KMM-BT328U.