JVC TH-W513B user manual

To connect your JVC remote to your TH-W513B soundbar, you need to follow these steps:
1. Ensure that your soundbar is powered on and in standby mode.
. On the JVC remote, press and hold the "M" (Menu) button and the "Power" button simultaneously for around 5 seconds.
3. The Power LED on the soundbar will begin flashing rapidly.
4. On the JVC remote, press the "Function" button repeatedly until the desired function mode is selected (e.g., "DVD", "CD", "AUX", etc.) based on your input source.
5. Aim the JVC remote directly at the soundbar and press the desired remote control button to test if it is working. If it is functioning correctly, the Power LED should stop flashing and remain solid.
6. Repeat steps 4 and 5 for each function mode you want to use with the JVC remote.
Note: The JVC remote control is designed to operate multiple JVC audio/video devices, so make sure to select the appropriate function mode on the remote for your TH-W513B soundbar. Additionally, ensure that you have installed the necessary batteries in the remote and they have enough charge.

Below are basic steps to pair your JVC wireless subwoofer to a Bluetooth-enabled device. However, keep in mind that the processes may vary slightly depending on the exact model of your subwoofer and device that you're pairing it with.
1. Power on the subwoofer: Turn on your JVC wireless subwoofer by pressing the power button.
2. Initiate pairing mode: On your subwoofer, press and hold the Bluetooth (or BT) button until you notice a light flashing. This usually means that the subwoofer is in pairing mode.
3. Make your device discoverable: On your Bluetooth-enabled device (like your phone, tablet, or computer), make sure Bluetooth is not only turned on but also set to "discoverable" mode. This allows the device to search for available devices to pair with.
4. Search for the subwoofer: On your device, look for available devices and select your JVC wireless subwoofer from the list. It might appear as "JVC TH-W513B" or similar.
5. Confirm the pairing: Your device may ask you to confirm the pairing or input a code (usually 0000 or 1234). Follow any additional instructions to confirm the pairing.
6. Testing: After pairing, check your audio to make sure it's coming out of the subwoofer.
If you are trying to pair it with the Sound Bar or Receiver, make sure both devices are compatible, often wireless Subwoofers are specifically designed to pair with a particular model of sound bar or receiver, in this case JVC TH-W513B. If you're having trouble, consult the user manual or contact JVC customer service.
In case you are pairing the devices for the first time there might be automatic pairing function where you just need to turn on both devices and they will connect.
Note: If the Subwoofer does not have any Bluetooth button, it connects wirelessly to compatible device without any pairing needed. All you have to do is turn on both devices and keep them closer. They should connect automatically.

To reset your JVC TH-W513B soundbar, you can follow these steps:
1. Ensure that the soundbar is turned on.
. Press and hold the "Power" button on the remote control for about five seconds until the soundbar displays "RESET" on the front panel.
3. Release the "Power" button.
4. The soundbar will turn off and then back on, indicating that the reset process is complete.
After the reset, your JVC TH-W513B soundbar will return to its factory default settings.

To connect your JVC subwoofer to your TV, you will need an audio cable that is compatible with both devices. Here's how you can do it:
1. Locate the audio output ports on your TV. These are usually labeled as "Audio Out" or "Audio Output" and may be either a 3.5mm headphone jack or RCA (red and white) ports.
2. If your TV has a 3.5mm headphone jack audio output, get a 3.5mm audio cable. If your TV has RCA audio output, get an RCA cable.
3. Connect one end of the audio cable to the corresponding audio output port on your TV.
4. Locate the audio input ports on your JVC subwoofer. These are usually RCA ports labeled as "Audio In" or "Input."
5. Connect the other end of the audio cable to the audio input port(s) on your subwoofer.
6. Once you have connected the audio cable between the TV and subwoofer, make sure both devices are powered on.
7. On your TV, go to the audio settings and ensure that the audio output is set to "External Speakers" or "Audio Out," depending on your TV model. This will usually involve navigating through your TV's menu or settings.
8. Adjust the subwoofer's volume and settings as desired. Many subwoofers have their own built-in controls for adjusting volume, crossover frequency, and other settings.
9. Test the connection by playing audio or a video with sound on your TV. You should now be able to hear the audio through your JVC subwoofer.
Note: The specific steps may vary depending on your TV and subwoofer models, so refer to your user manuals for detailed instructions if necessary.