JVC KW-R920BT user manual

The JVC KW-x830BTS shares a similar pairing process with the KW-r920BT. Follow these steps to pair your device:
1. Activate the Bluetooth settings on your mobile device.
2. Press and hold the Bluetooth button on the car stereo until the Bluetooth icon starts flashing.
3. On your mobile device, search for new devices in the Bluetooth settings. The car stereo should appear on the list as 'JVC UNIT'.
4. Select 'JVC UNIT' on your mobile device to pair with the car stereo. If prompted to enter a password, try '0000' or '1234', unless you have set a different password.
5. Once paired and connected, the Bluetooth icon on the car stereo will stop flashing and remain lit.
Please note that the Bluetooth button might be represented by a symbol instead of the word 'Bluetooth', and the 'hold' action might actually be a long press. You may need to refer to the car stereo's manual for the exact steps, as different models can have different procedures.

To connect your JVC KW-R920BT Bluetooth to your device, follow these steps:
1. Turn on the Bluetooth feature on your device (phone, tablet, etc.).
. Press the "Bluetooth" button on the JVC KW-R920BT to activate the Bluetooth mode.
3. On your device, search for Bluetooth devices.
4. A device named "JVC KW-R920BT" should appear in the list of available devices. Select it to start the pairing process.
5. The JVC receiver may prompt you for a PIN code to pair with your device. Enter "0000" as the PIN code.
6. Once connected, you should see a confirmation message on both your device and the JVC KW-R920BT receiver.
7. You can now use the receiver to stream audio, make hands-free calls, and control music playback from your connected device.
Please note that the exact steps may vary slightly depending on your device and firmware version of the JVC KW-R920BT. Make sure to consult the user manual for more specific instructions if needed.

To connect your JVC KW-R920BT Bluetooth receiver to your iPhone, follow these steps:
1. On your iPhone, go to the "Settings" app and open the Bluetooth settings.
. Make sure Bluetooth is enabled on your iPhone.
3. Turn off the JVC KW-R920BT receiver if it's already on.
4. Press and hold down the "Phone" button on the receiver's panel for a few seconds until the Bluetooth pairing menu appears.
5. On your iPhone, you should see the receiver's name (e.g., "KW-R920BT") listed under available devices. Tap on it to start the pairing process.
6. If prompted, enter a passcode or PIN on your iPhone to pair with the receiver. You may also see a confirmation message on the receiver asking you to pair with your iPhone. Confirm the pairing on both devices.
7. Once connected, the Bluetooth indicator on the receiver should light up, indicating a successful connection.
8. On your iPhone, you can now play audio through the JVC receiver by selecting it as the audio output device. This can usually be done in the "Control Center" or by selecting the receiver in the audio output settings of apps or media players.
Note: The exact steps or interface may vary slightly depending on the version of the iPhone's operating system or any updates made to the JVC KW-R920BT firmware.