JBL WAVE-100TWS user manual

No, the JBL Wave 100TWS does not have active noise cancellation.

The JBL Wave 100TWS earbuds have different light indications which help to indicate various functions and status.
1. Power On/Off: When you turn on the earbuds, the indicator will usually light up in white or blue color. When powering off, the light may flash red a few times before it completely turns off.
2. Pairing Mode: In pairing mode, the light usually alternates between white and blue, indicating that the earbuds are ready to connect to a device.
3. Connected: Once the earbuds are successfully paired and connected to a device, the light usually stays solid white or blue. It indicates that the connection is established.
4. Battery Level: The earbuds may have different light indications to show the battery level. For example, the light might turn solid green if the battery has a high charge, or it might start blinking in red if the battery is low and needs to be charged.
5. Charging: When you connect the earbuds to the charging case, the light on the case indicates the charging status. It usually lights up in different colors to show that the charging is in progress, and it may turn solid when the earbuds are fully charged.
It's important to refer to the user manual provided with the earbuds for specific details about the light indications.

To pair your JBL earbuds to each other, follow these steps:
1. Turn off the earbuds: Make sure both the left and right earbuds are turned off before starting the pairing process.
2. Put the earbuds into pairing mode: Press and hold the power button on both earbuds simultaneously until the LED indicators start flashing or you hear a sound indicating that the earbuds are in pairing mode.
3. Check for successful pairing: The LED lights on the earbuds should flash in a synchronized manner, indicating that the pairing was successful. Alternatively, you may hear a voice prompt indicating the pairing status.
4. Test the connection: Once paired, try playing audio to ensure the connection is established between the earbuds.
Note: The exact pairing process may vary depending on the model of your JBL earbuds. It's recommended to refer to the manufacturer's instructions specific to your device for accurate and detailed pairing steps.