JBL QUANTUM-610-WIRELESS user manual

To put your JBL Quantum 610 wireless headphones into pairing mode, follow these steps:
1. Ensure that the headphones are turned off. If they are on, press and hold the power button for a few seconds to turn them off.
. Press and hold the Bluetooth button located on the right earcup. Hold it until the LED light on the headphones starts flashing. This indicates that the headphones are in pairing mode.
3. On your desired device (e.g., smartphone, tablet, computer), go to the Bluetooth settings.
4. Enable Bluetooth if it is not already turned on.
5. Search for available Bluetooth devices. Your JBL Quantum 610 should appear on the list of available devices.
6. Select the JBL Quantum 610 from the list to initiate the pairing.
7. Once successfully paired, the LED light on the headphones should stop flashing, indicating that they are now connected to your device.
Note: Make sure that the distance between the headphones and the device you are pairing them with is within a reasonable range for a stable Bluetooth connection.

Yes, the JBL Quantum 610 is a wireless headset that supports Bluetooth connectivity.

To reset your JBL Quantum 610 wireless headset, follow these steps:
1. Power off your headset.
. Press and hold the Volume + and Volume - buttons simultaneously for about 5 seconds until the LED indicators on both ear cups flash white.
3. The reset is now complete. You can power on the headset and pair it with your device again.
Note: Resetting your headset will remove any paired devices, and you'll need to re-pair them after the reset.