JBL CHARGE user manual

If your JBL Charge speaker is blinking red and blue, it typically means that it is in pairing mode. This mode is activated when you press and hold the Bluetooth button on the speaker for a few seconds. It allows the speaker to be discoverable by other devices so that you can connect and play audio wirelessly. To exit pairing mode, either connect a device to the speaker or press the Bluetooth button again to turn off Bluetooth.

If your JBL Charge is blinking a red light, it usually indicates that the battery is low and needs to be charged. Make sure to connect your JBL Charge to a power source using the included charging cable. The red blinking light should stop once the battery is fully charged. If the red light continues to blink even after charging, there may be an issue with the battery or the device itself. In this case, it is recommended to contact JBL customer support for further assistance.

On the JBL Charge, there are typically several buttons located on the device. Here is a general explanation of the buttons and their functions:
1. Power/Bluetooth Button: This button is used to turn the speaker on or off. Press and hold this button to activate the Bluetooth pairing mode.
2. Volume Up/Down Buttons: These buttons control the speaker's volume level. Pressing the volume up button raises the volume, while pressing the volume down button lowers it.
3. Play/Pause Button: This button is used to play or pause audio playback. If music is playing, pressing this button will pause it, and pressing it again will resume playback.
4. Bluetooth Pairing Button: Some JBL Charge models have a dedicated Bluetooth pairing button. Pressing this button puts the speaker into pairing mode, allowing you to connect your device via Bluetooth.
5. Battery Indicator Button: This button is used to check the remaining battery life on the speaker. Pressing it will activate the LED battery indicator lights, which indicate the current charge level.
Please note that the button layout may vary slightly depending on the specific model of JBL Charge you are referring to. It is recommended to consult the user manual of your particular device for detailed instructions on button functions and usage.