JBL CHARGE-4 user manual

The JBL Charge 4 does not have an "infinite button." However, if you are referring to the "JBL Connect+" button, it allows you to connect multiple JBL Connect+ compatible speakers together for a synchronized audio experience. It essentially allows you to create a larger sound system by connecting multiple speakers wirelessly.

The JBL Charge 4 has several buttons that serve different functions:
1. Power Button: Located on the top of the speaker, this button turns the device on or off.
2. Bluetooth Pairing Button: Located next to the power button, this button puts the speaker into pairing mode so you can connect it to your Bluetooth device.
3. Volume Buttons: Found on the top of the speaker, these buttons allow you to adjust the volume level. Pressing the "+" button increases the volume, while pressing the "-" button decreases it.
4. Play/Pause Button: Located in the center of the volume buttons, this button allows you to play or pause audio playback.
5. JBL Connect+: Located at the bottom of the control panel, this button allows you to connect multiple JBL Connect+ enabled speakers together for a synchronized audio experience.
6. Charging Port: On the back of the speaker, you'll find a port where you can connect the charger to charge the device.
7. USB Port: Also located on the back, this USB port allows you to charge other devices using the speaker's battery power.
Please note that the exact button layout and placement may vary slightly depending on the model and version of the JBL Charge 4 speaker.

To adjust your JBL Charge 4, you can follow these steps:
1. Power on the JBL Charge 4 by pressing and holding the power button for a few seconds until the power indicator lights up.
2. You can adjust the volume by pressing the '+' button on the speaker to increase the volume or the '-' button to decrease it.
3. If you want to pause or resume playback, press the play/pause button located between the volume buttons.
4. To skip to the next track, press the forward button once. To go to the previous track, press the back button.
5. If you want to activate or deactivate the JBL Connect+ mode (allowing you to connect multiple JBL speakers together), press and hold the Bluetooth button and the volume up button together for a few seconds.
6. To pair your JBL Charge 4 with a Bluetooth device, make sure the speaker is in pairing mode (the power indicator will be flashing) and search for available Bluetooth devices on your device's settings. Select "JBL Charge 4" from the list and wait for the successful pairing confirmation.
7. If you encounter any issues or want to explore more features, refer to the user manual provided with the speaker or visit the JBL website for further assistance.