JAM TRANCE-MINI-HX-P460 user manual

There could be several reasons why your Jam Trance Mini HX-P460 speaker is not turning on. Here are a few troubleshooting steps you can try:
1. Ensure the speaker is charged: Connect the speaker to a power source using the included USB cable and let it charge for a few hours. Make sure you're using a power source that is functioning properly.
2. Check the power button: Press and hold the power button on the speaker for a few seconds to see if it turns on. If the power button is stuck or not responding, it may require repair or replacement.
3. Reset the speaker: Look for a small pinhole or reset button on the speaker. Use a paperclip or a similar tool to press and hold this button for a few seconds. Then try turning on the speaker again.
4. Check the battery: If the speaker is not holding a charge or is very old, the battery may need to be replaced. Consider contacting the manufacturer or a professional for assistance with replacing the battery.
5. Software/firmware issues: Sometimes, updating the speaker's firmware can resolve power-related issues. Check the manufacturer's website or contact their customer support for instructions on how to update the firmware.
If you have tried these troubleshooting steps and the speaker still does not turn on, it might be a hardware issue. In that case, it's best to contact the manufacturer's customer support for further assistance or consider taking it to a professional for repair.

To connect your Jam Trance Mini HX-P460 speaker to your iPhone, follow these steps:
1. Turn on your Jam Trance Mini speaker by pressing and holding the power button until it powers on.
2. On your iPhone, go to the Settings app.
3. Tap on Bluetooth to access the Bluetooth settings.
4. Make sure Bluetooth is turned on. If it's off, toggle the switch to enable it.
5. Your iPhone will scan for available Bluetooth devices. After a moment, you should see your Jam Trance Mini speaker listed under "Other Devices" or "My Devices" as HX-P460 or something similar.
6. Tap on your Jam speaker in the list to start the pairing process.
7. Your iPhone will connect to the Jam Trance Mini speaker, and once connected, you should see a notification or hear a sound indicating the successful pairing.
8. Now you can start playing audio from your iPhone, and it will be transmitted wirelessly to the Jam Trance Mini speaker.
Note: If you encounter any trouble connecting, ensure that your Jam Trance Mini speaker is in pairing mode (typically indicated by a flashing LED light) and that it's within range of your iPhone.

To put your Jam Trance Mini HX-P460 speaker in pairing mode, follow these simple steps:
1. Make sure the speaker is on by holding down the power button for 3-5 seconds.
. Once the speaker is on, press the play/pause button for about 5 seconds. The speaker will make a beeping sound and the lights will start flashing, indicating that it is now in pairing mode.
3. On your device (smartphone, tablet, laptop, etc.), go to the settings menu and turn on Bluetooth.
4. Look for a device named 'Jam Trance Mini' in the list of available devices. Click on it to pair.
5. Once paired successfully, the speaker will make a sound indicating that it is connected.
If the speaker has been paired to a device before, it should automatically try to connect to that device again when turned on and within range. If you want to pair with a new device, you may need to disconnect the old device first.

There could be several reasons why your Jam speaker is not connecting. Here are some troubleshooting steps you can try:
1. Make sure your speaker is charged: Ensure that your Jam speaker has enough battery power to establish a connection. Connect it to a power source and let it charge for a sufficient amount of time.
2. Enable Bluetooth on your device: Check if Bluetooth is enabled on the device you are trying to connect your speaker to. You can usually find this option in the device's settings menu.
3. Bring the devices closer: Ensure that your speaker and the device you are trying to connect it with are within close proximity. Bluetooth signals can weaken over longer distances, so bringing them closer can help establish a connection.
4. Clear paired devices list on the speaker: Sometimes, the device memory of your speaker can become full, preventing new connections. To clear the paired devices list, press and hold the Bluetooth button on your speaker until it enters pairing mode. This will remove all previously paired devices.
5. Restart devices: Turn off both your Jam speaker and the device you are trying to connect it with, then turn them back on. Sometimes, restarting the devices can resolve connection issues.
6. Update firmware or software: Check if there are any firmware or software updates available for your speaker or device. Outdated software can sometimes cause compatibility issues.
7. Reset your speaker: If none of the above steps worked, you may try resetting your Jam speaker to factory settings. Refer to the user manual or the manufacturer's website for instructions on how to perform a reset.
If your Jam speaker still fails to connect after trying these steps, there might be a hardware issue. Contact the manufacturer's customer support for further assistance.