iRobot ROOMBA-695 user manual

Roomba robots, including the Roomba 695, do not need to be plugged in all the time. These robots come with a rechargeable battery, and they typically automatically return to their charging base when they need to recharge. It is generally recommended to keep the Roomba charging when not in use to ensure it is always ready to clean. However, extended periods of non-use may require fully charging the robot and then disconnecting it until needed again.

There could be several reasons why your Roomba vacuum is not working. Some possible reasons include:
1. Power Issues: Make sure the Roomba is properly charged. If its battery is low or damaged, it may not work properly. Check if the charging dock is working correctly and try a different power outlet if necessary.
2. Obstructions: If the Roomba is not moving or navigating properly, check for any obstacles in its path. Remove any debris, tangled hair, or objects that may be blocking the wheels, brushes, or sensors.
3. Sensor Interference: Roombas use various sensors to navigate and detect dirt. If these sensors are obscured or dirty, the vacuum may not work properly. Clean the sensors and ensure clear visibility.
4. Software or Firmware Issues: Occasionally, Roombas may encounter software glitches or need firmware updates. Check for any available updates and ensure your Roomba has the latest software version installed.
5. Mechanical Problems: Inspect the brushes, wheels, and other mechanical parts for any damage, wear, or clogs. If any components are broken or malfunctioning, it may prevent the Roomba from working properly.
If none of these troubleshooting steps resolve the issue, it may be necessary to contact Roomba customer support for further assistance or consider seeking professional repair services.

The buttons on a Roomba vacuum cleaner can vary depending on the model, but here are some commonly found buttons:
1. Clean: This button starts or pauses the cleaning cycle.
. Home: Pressing this button sends the Roomba back to its docking station.
3. Spot Clean: This button is used for thoroughly cleaning a specific area.
4. Schedule: Allows you to set a specific time for the Roomba to start cleaning automatically.
5. Dock: Sends the Roomba back to its docking station without starting a cleaning session.
6. Power: Turns on or off the Roomba.
7. Spot Cleaning Mode: This button activates the Roomba's spot cleaning mode, where it concentrates on a small, heavily soiled area.
8. Virtual Wall: Some models have a virtual wall button, which helps create an invisible barrier to restrict the Roomba's cleaning area.
9. Recharge: This button forces the Roomba to return to its charging dock even if it's not completely out of battery.
Note: The availability and exact functions of the buttons may differ between Roomba models.