ION BLOCK-ROCKER-BLUETOOTH user manual

To set up an Ion Block Rocker Bluetooth, follow these steps:
1. Unbox the unit and take out all the components from the packaging.
. Place the unit on a stable surface or mount it on a speaker stand if desired.
3. Connect the included power cable to the power input on the back of the unit, and plug the other end into a power outlet. Switch on the power button if available.
4. If you want to use the built-in rechargeable battery, charge the unit fully before use. You can do this by leaving it connected to a power source for a few hours.
5. Locate the Bluetooth button on the unit (usually marked with a Bluetooth symbol). Press and hold this button until the Bluetooth status light starts flashing.
6. On your Bluetooth-enabled device (smartphone, tablet, etc.), go to the settings menu and enable Bluetooth.
7. In the Bluetooth settings, search for available devices. A device named "Ion Block Rocker" should appear on the list. Select it to pair with the unit.
8. Once successfully paired, the Bluetooth status light on the Block Rocker will stop flashing and remain solid, indicating a stable connection.
9. Adjust the volume and other settings on both the Block Rocker and your device to the desired levels.
10. You can also connect other audio sources to the Block Rocker using the various input options available (e.g., AUX cable, microphone, instrument input).
11. Start playing your favorite music or other audio content on your Bluetooth device, and it should be transmitted wirelessly to the Block Rocker.
12. Use the Block Rocker's control panel (buttons, knobs) or the included remote control to adjust the volume, EQ settings, and other settings as per your preference.
13. In case of any issues or for more advanced settings/functions, refer to the user manual that came with the Block Rocker or visit the Ion Audio website for further support.

There could be several reasons why your Block Rocker Bluetooth speaker is not working. Here are a few common troubleshooting steps you can try:
1. Ensure that your Block Rocker speaker is adequately charged or connected to a power source. If the battery is low, it may prevent Bluetooth connectivity.
2. Make sure that your device (phone, tablet, etc.) is within range and not too far away from the Block Rocker speaker. Bluetooth has a limited range, typically around 30 feet, so ensure you are close enough for a connection.
3. Turn off and on the Bluetooth feature on both your device and the Block Rocker speaker. Sometimes, resetting the connection can help establish a new pairing.
4. Check if the Block Rocker is already paired with another device. Bluetooth devices can only connect to one device at a time. If it is connected to another device, disconnect it and try connecting with your device again.
5. Ensure that your device's Bluetooth is turned on and discoverable, allowing it to connect to the Block Rocker speaker.
6. Try forgetting the Block Rocker from your device's Bluetooth settings and re-pairing it as a fresh connection.
If none of these steps solve the issue, there may be a problem with the Block Rocker's Bluetooth module, and you might need to contact customer support or review the product's documentation for further assistance.

There could be several reasons why your Party Rocker Bluetooth speaker is not connecting. Here are some troubleshooting steps you can try:
1. Make sure the Party Rocker is turned on and in Bluetooth pairing mode. Check the user manual for the specific instructions on how to do this.
2. Ensure that the Bluetooth feature on your device (phone, tablet, etc.) is turned on and in discoverable mode.
3. Disconnect and forget the Party Rocker from your device's Bluetooth settings, then try to reconnect it.
4. Power off and restart both the Party Rocker and your device.
5. Check if there are any other Bluetooth devices actively connected to your device. Disconnecting them or turning off their Bluetooth might help.
6. Verify that the Party Rocker is within range of your device. Bluetooth typically has a range of around 30 feet, so make sure you are not too far away.
7. Try pairing the Party Rocker with a different device to see if there is an issue with your original device's Bluetooth connectivity.
8. Update the firmware of your Party Rocker if there is a newer version available. Check the manufacturer's website for any available updates and instructions on how to install them.
If none of these steps work, it is recommended to contact the manufacturer's customer support for further assistance.