IKEA RENLIG-IWM60 user manual

To unlock your Ikea Renlig IWM60 washing machine, you can follow these steps:
1. Make sure the washing machine is turned on or has power supply.
. Locate the "Start/Pause" button on the control panel of your washing machine.
3. Press and hold the "Start/Pause" button for approximately 3 to 5 seconds until you hear a beep or see the door lock symbol on the display disappear. This will unlock the door of the machine.
4. Once the door is unlocked, you can now open it and access the drum.
If the above steps do not work, please refer to your Ikea Renlig IWM60 washing machine's user manual for specific instructions or troubleshoot any potential issues.

The Renlig washing machine is a product manufactured by IKEA.

Error 10 on the IKEA RENLIG IWM60 washing machine indicates a door lock issue. This error occurs when the machine is unable to lock the door properly. Possible reasons for this error include a faulty door lock mechanism, a problem with the wiring, or a malfunctioning control board. To resolve this issue, you can try the following steps:
1. Make sure the door is closed properly and restart the washing machine.
. Check if there are any obstructions preventing the door from closing, such as clothing or debris.
3. Ensure that the door lock mechanism is not damaged or broken. If it appears to be defective, you may need to replace it.
4. Inspect the wiring connections to the door lock and make sure they are secure. If any wires are loose or damaged, they should be repaired or replaced.
5. If none of the above steps resolve the issue, it is recommended to contact IKEA customer support or a professional technician to further diagnose and resolve the error.

To stop the IKEA Renlig IWM60 washing machine, you can follow these steps:
1. Press and hold the "Start/Pause" button on the control panel. This button is usually located towards the right side of the control panel and may have a play/pause symbol on it.
2. Hold the button until the washing machine stops completely. It may take a few seconds for the machine to stop its current operation.
3. Once the machine has stopped, release the "Start/Pause" button.
4. You can now open the door of the washing machine to access your laundry and remove it if needed.
Note: Always ensure that the washing machine is completely stopped before opening the door to prevent any accidents or damage.