Humax S-HD-3 user manual

To update the channels on your Humax S-HD-3, you can follow these steps:
1. Press the "Menu" button on your remote control.
. Using the arrow buttons, navigate to the "Settings" or "Configuration" option.
3. Select "Channel Setup" or "Channel Search" from the settings menu.
4. Choose the type of channel update you want, either "Automatic Update" or "Manual Update."
- Automatic Update: This option allows the Humax receiver to automatically search for and update new channels. If available, the receiver will download and install any new channels found.
- Manual Update: If you prefer a manual update, you can select this option, and the receiver will scan for new channels upon your command.
5. Start the channel update process by selecting "Start" or "Scan."
6. Wait for the receiver to complete the scanning process. It may take a few minutes to search for new channels.
7. Once the scan is finished, you will be prompted to save the new channel list. Select "Save" or "Apply" to finalize the update.
8. The receiver will then display the updated channel list, and you can start enjoying the new channels.
Note: The exact menu options and navigation may vary based on the specific model of your Humax device. Refer to your user manual for more detailed instructions if necessary.

To rescan channels on your Humax S-HD-3 box, follow these steps:
1. Press the "Menu" button on your remote control.
. Using the arrow keys, navigate to the "Settings" option and press "OK".
3. Select "Installation" from the menu and press "OK".
4. Choose "Automatic Channel Scan" and press "OK".
5. You may be prompted to enter a PIN. If you have set a PIN, enter it and press "OK". If not, continue to the next step.
6. Select the "Start Scan" option and press "OK". This will initiate the channel scanning process.
7. Wait for the scanning process to complete. It might take several minutes.
8. Once the scan is finished, the new channels will be displayed on your screen.
Note: The exact steps may vary slightly depending on your specific Humax model and firmware version.

Yes, as of my knowledge in October 2021, Humax is still in business. They are a leading manufacturer of digital set-top boxes, digital video recorders (DVRs), and other consumer electronics. However, it's always a good idea to check for the most recent information as business statuses can change over time.

The Humax S-HD-3 box typically requires the following connections:
1. Power: It needs to be connected to a power source using an AC power cable.
. Antenna/Cable: It requires an RF input to receive signals from an antenna or cable TV source.
3. HDMI: For high-definition video and audio output, it can be connected to a compatible TV using an HDMI cable.
4. Composite/Component: If your TV does not have an HDMI input, you can use composite or component cables to connect the box to the TV.
5. Ethernet: For internet connectivity and accessing online services, a network Ethernet cable can be connected to the box and a router.
6. USB: The box may have USB ports to connect external storage devices like USB flash drives or external hard drives to record and play multimedia files.
7. Optical/Coaxial Audio: To connect the box to a home theater system or soundbar, you can use either an optical or coaxial audio cable for digital audio output.
8. IR Extender (optional): If the box is not in the line of sight of the remote control, an IR extender cable can be connected to the box to control it from a different location.
Note that the specific connections may vary depending on the model and version of the Humax S-HD-3 box.