Huion KAMVAS-13 user manual

To connect your Huion Kamvas 13 to your computer, follow the steps below:
1. First, make sure your computer is powered on and the operating system is running.
2. Connect one end of the USB cable to the USB-C port on your Kamvas 13 tablet.
3. Connect the other end of the USB cable to an available USB port on your computer.
4. Once the tablet is connected, it should power on automatically. If not, press the power button located on the side of the tablet.
5. Your computer should detect the Kamvas 13 automatically. It will prompt you to install the necessary drivers and software. Follow the on-screen instructions to complete the driver installation process.
6. After the driver installation is complete, you may need to restart your computer.
7. Once the computer restarts, the Kamvas 13 should be ready to use. You can now use the pen on the tablet's screen, and your computer should recognize it as an input device.
Note: Some computers may require additional steps, such as adjusting the display settings or enabling specific features. The exact process may vary depending on your computer's operating system and settings. It's recommended to consult the user manual or support documentation for your specific computer or operating system for more detailed instructions.

To get started with Huion Kamvas 13, follow these steps:
1. Unbox the tablet and make sure you have all the necessary components including the tablet, pen, cable, and stand.
. Connect the tablet to your computer using the provided USB-C cable. Make sure the cable is securely inserted into both the tablet and your computer.
3. Install the Huion drivers on your computer. You can find the drivers on the official Huion website. Download the appropriate driver for your operating system and install it.
4. After installation, restart your computer to ensure the driver functions properly.
5. Once your computer has restarted, turn on the Huion Kamvas 13 tablet.
6. Calibrate your pen. Open the driver software and locate the pen calibration settings. Follow the on-screen instructions to calibrate your pen's pressure sensitivity and cursor positioning.
7. Adjust the tablet settings according to your preference. You can modify the pressure sensitivity, pen button functions, display settings, and more through the driver software.
8. Place the tablet on the stand provided or any other suitable surface, and you're ready to start creating with your Huion Kamvas 13!
Make sure to refer to the user manual provided with the tablet for detailed instructions and troubleshooting tips.

There could be a few reasons why your Huion Kamvas 13 is not being detected as a monitor:
1. Connection issue: First, ensure that you have properly connected your Kamvas 13 to your computer. Make sure the HDMI cable is securely plugged into both the tablet and the computer, and that the USB cable is also connected properly.
2. Drivers: It is essential to have the appropriate drivers installed on your computer for the Kamvas 13 to be detected. Check the manufacturer's website for the latest drivers for your specific operating system and install them. Some devices may require additional driver updates for improved compatibility.
3. Incorrect settings: Make sure that you have set up the display settings correctly on your computer. Go to your computer's display settings and check if the Kamvas 13 is recognized as a connected monitor. You may need to adjust the resolution, orientation, or other display settings to make it work correctly.
4. Compatibility issues: Ensure that your computer's hardware and operating system are compatible with the Kamvas 13. Check the minimum system requirements specified by the manufacturer to confirm compatibility.
5. USB connection mode: The Kamvas 13 might have different connectivity modes (such as HDMI or DP). Ensure you have selected the appropriate mode via the settings on the tablet.
If you have tried all the above steps and the Kamvas 13 is still not being detected as a monitor, you may want to contact Huion customer support for further assistance.

No, the Huion Kamvas 13 does not need to be charged. It is powered through the USB cable connection to your computer or laptop.