Huawei SCALE-3 user manual

You can use the Huawei Health App to connect and use the Huawei Scale 3. This app will allow you to track and monitor your health stats collected by the scale, such as BMI, body fat percentage, etc. It's available for download on both Android and iOS devices.

To set up your Huawei Scale 3, please follow these steps:
1. Ensure that the batteries are properly inserted into the scale. The Scale 3 requires 4 AAA batteries.
2. Download and install the Huawei Health app on your smartphone. The app is available for both Android and iOS devices.
3. Open the Huawei Health app and create a new account or log in to your existing account.
4. Make sure that Bluetooth is enabled on your smartphone.
5. On the app's home screen, tap on the "Devices" tab at the bottom.
6. Tap on the "+" (plus) icon in the top right corner of the screen to add a new device.
7. Select "Scale" from the list of available devices.
8. Follow the on-screen instructions to put the scale into pairing mode. This usually involves stepping on the scale with bare feet.
9. Once in pairing mode, the scale should appear in the app. Tap on it to connect and complete the setup process.
10. Once connected, you may need to enter some additional information such as your height and birthday to personalize the data.
11. You can now use the scale to measure your weight and other body composition metrics. Just step on the scale with bare feet, and the data will be automatically synced to the Huawei Health app.
Remember to keep your smartphone within Bluetooth range of the scale for the data to sync accurately.

To change your Huawei Scale 3 to display weight in pounds instead of kilograms, you can follow these steps:
1. Make sure your Huawei Scale 3 is connected to your smartphone via the Huawei Health app.
2. Open the Huawei Health app on your smartphone and go to the Devices tab.
3. Under the Devices tab, locate and select your Huawei Scale 3.
4. In the Scale settings, look for the unit of measurement option, which is typically displayed as "Unit," "Unit of measure," or "Measurement unit."
5. Tap on the unit option and select "lbs" or "pounds" as your desired measurement unit.
6. Save the changes, and the Huawei Scale 3 will now display weight measurements in pounds.
Note: The exact steps may slightly vary depending on the version of the Huawei Health app and the firmware of your Huawei Scale 3.