Huawei E5577S user manual

The Huawei E5577 and E5577C are mobile Wi-Fi routers or portable hotspots. Here are the main differences between the two models:
1. Design: The physical design of the E5577 and E5577C may differ slightly. However, both devices are compact and portable.
2. LTE Bands: The key difference lies in the supported LTE bands. The Huawei E5577 supports LTE Category 4 and various FDD and TDD bands, providing broader compatibility with different mobile networks worldwide. On the other hand, the E5577C may support a subset of LTE bands, specific to certain regions or network operators. The availability of LTE bands may vary depending on the market or the specific model variant.
3. Region Availability: The E5577 and E5577C are aimed at different markets. The E5577C model is typically intended for specific regions, while the E5577 is available in a broader range of markets worldwide.
4. Software Features: There may be subtle differences in the software features and user interface between the E5577 and E5577C, based on the firmware versions and specific customization implemented by the network operators or regions.
It's important to note that the exact specifications and capabilities of these devices may vary depending on the specific model variant and the region in which they are intended for use. It is recommended to refer to the official documentation or contact Huawei directly for precise information regarding each model in your specific region.

The default password for Huawei E5577 is typically "admin". However, if the password has been changed, you will need to reset the device to its factory settings to revert to the default password.

The default login for the Huawei E5577s pocket Wi-Fi is usually:
Username: admin
Password: admin

To set up the Huawei Mobile WiFi E5577, follow these steps:
1. Insert a SIM card into the device. Make sure it is compatible with the device and has an active data plan.
2. Turn on the Huawei E5577 by pressing and holding the power button until the device powers on.
3. On your computer or mobile device, search for available Wi-Fi networks and connect to the network name shown on the Huawei E5577 screen. The default network name should be something like "Huawei E5577-xxxx".
4. Open a web browser and enter the default web address: http://192.168.8.1/. If prompted, enter the default username and password, which is usually "admin" in both cases.
5. Once logged in, you will be taken to the Huawei E5577 web management page. Here, you can customize various settings, manage connected devices, and monitor data usage.
6. If necessary, you may also change the Wi-Fi network name (SSID) and password. Look for the wireless settings option on the management page and modify the network name and password to your preference.
7. You can also manage other advanced settings like network mode, firewall, VPN, etc., if needed. However, it's recommended to keep these settings as default unless you have specific requirements.
8. After configuring the settings, click on "Apply" or "Save" to save the changes. The device may reboot to apply the new settings.
9. Once the configuration is complete, you can connect your devices to the Huawei E5577 using the new Wi-Fi network name and password you have set.
Note: The exact steps and options may vary slightly depending on the firmware version and customization of your Huawei E5577 device.