Huawei E3372 user manual

No, the Huawei E3372 dongle does not have built-in Wi-Fi capabilities. It is a 4G/LTE USB modem that provides internet connectivity through a computer or device's USB port.

Yes, Huawei E3372 is compatible with Windows 10. The device is designed to work with various operating systems, including Windows 10. You may need to install the necessary drivers or software provided by Huawei to ensure proper functionality on your Windows 10 machine.

The default Wi-Fi password for Huawei E3372 is usually printed on the sticker at the back of the device. However, if that sticker is missing, the default password is often "admin" or "password".

To configure the Huawei E3372, follow the steps below:
1. Connect the Huawei E3372 to your computer using a USB cable.
. Open a web browser and enter 192.168.8.1 in the address bar. Press Enter.
3. You will be prompted to enter a username and password. The default username and password are usually "admin".
4. Once logged in, you will be taken to the main interface of the Huawei E3372 dashboard.
5. From the main interface, you can access various settings and features of the modem.
- To set up an internet connection, click on "Mobile Connection" or "Internet" tab, depending on your dashboard version.
- Click on "Settings" or "Connection Settings" to configure the connection profile.
- Enter the necessary APN, username, and password provided by your mobile network provider.
- Save the settings and go back to the main interface.
6. You can also configure Wi-Fi settings, SMS settings, and other advanced features as per your requirement.
7. Once you have configured all the necessary settings, close the web browser and start using the Huawei E3372 for internet connection.
Note: The steps mentioned above may vary slightly depending on the specific model and firmware version of your Huawei E3372 modem. Always consult the user manual provided with the device for detailed instructions.