Huawei 5G-CPE-PRO-2-H122-373 user manual

Huawei 5G router generally includes some light indicators to show the status of different functionalities. Here is the general interpretation of these lights:
1. **Power**: It indicates whether the power is turned on or off. When the light is solid green, it means the router is turned on whereas an off light means the router is not powered.
2. **Signal Strength**: This indicator gives information about the strength of the signal. The more LED lights are on, the stronger the signal. If the indicator is off, it means the router is not connected to a network.
3. **LAN/WAN**: When the light is solid green, it means that the router is connected to an Ethernet network. If it is blinking, it means data is being transmitted. If the light is off, no Ethernet cable is connected.
4. **WPS**: WPS stands for Wi-Fi Protected Setup. The light turns on or blinks when WPS is in process. It remains off when not in use.
5. **WiFi**: If this light is solid green, the WiFi is enabled. If it’s blinking, that means data is being transmitted over WiFi. If the light is off, the WiFi is disabled.
6. **5G/4G**: This light indicator would tell if the router is connected to a 5G or 4G network. If the light is off, there is no Internet connection.
Remember that light indications may vary with different models of routers. Always refer to the user manual to get the accurate interpretation of these lights.
Note: Huawei's 5G Router may have a Signal indicator color change depending on signal situation.
-Solid green: normal signal.
-Solid red: no signal or very weak signal.
-Solid orange: weak signal (service may be affected).

As of my knowledge, there is no specific information available regarding the current version of Huawei 5G CPE Pro 2 H122-373. It's recommended to visit the official Huawei website or contact Huawei customer support for the most accurate and up-to-date information about the device's current version.

To set up your Huawei 5G CPE Pro 2 H122-373 router, follow these steps:
1. Connect the power adapter to the router and plug it into a power outlet.
2. On your computer or mobile device, go to the available Wi-Fi networks and connect to the network named "Huawei-XXXX." (XXXX represents the last four characters of the Wi-Fi network's SSID)
3. Open a web browser (such as Google Chrome, Mozilla Firefox, or Internet Explorer) and enter the default IP address for the router in the address bar. The default IP address is usually "192.168.3.1" or "192.168.8.1." Press Enter to access the router's admin interface.
4. If prompted, enter the default login credentials. The default username and password are usually both "admin." Click Login or OK to proceed.
5. Once logged in, you'll be taken to the router's settings dashboard. Follow the on-screen instructions to set up a new username and password for the admin interface.
6. Navigate to the wireless settings section. Here, you can customize the Wi-Fi settings, including the SSID (network name) and password for both the 2.4GHz and 5GHz frequency bands. Make sure to set up a strong and secure password for the Wi-Fi network.
7. You can also configure other settings such as network mode, security, DHCP settings, and more as per your requirements.
8. After making the desired changes, click on Apply or Save to save the settings.
9. The router will apply the changes, and you will be disconnected from the admin interface momentarily. Reconnect to the Wi-Fi network (now with your customized SSID and password) to continue using the internet.
That's it! Your Huawei 5G CPE Pro 2 router is now set up and ready to use.

The default admin password for Huawei 5G CPE Pro 2 is usually printed on a sticker or label placed on the device itself. However, if the label is not present or you cannot find it, the default admin password is typically "admin".