HP PHOTOSMART-6520 user manual

To connect your HP Photosmart 6520, follow the steps below:
Initial Setup:
1. Unpack the printer from its packaging, and remove all tape and packaging material.
2. Connect the power cord to the rear of the printer, and then plug into an electrical outlet.
3. Turn on the printer by pressing the Power button.
4. Open the cartridge access door and install the ink cartridges that came with the printer.
5. Load paper into the paper feed tray.
Connecting to Wi-Fi:
1. Click on the wireless button on your printer's control panel. This will illuminate the wireless status light.
2. Now, on the printer's control panel, tap the "Wireless" icon. Next, select the "Wireless Setup Wizard" option, which will search for wireless routers within range.
3. A list of available networks should appear. From these options, select your network/SSID.
4. After selecting the applicable Wi-Fi network, enter your network's WEP key/WPA passphrase when prompted and confirm your selection.
Connecting to a Computer:
1. Visit 123.hp.com on your computer and download the HP Easy Start app or printer software. This will guide you through the rest of the setup process.
2. Once you've downloaded and opened the app, it should automatically recognize your printer.
3. Follow the onscreen instructions. During this process, select “Wireless” when asked about the connection type.
4. As prompted, you will enter your Wi-Fi network name and password.
After these steps, your HP Photosmart 6520 should be ready to use. In addition, you can use the HP ePrint feature to print from anywhere with an active Internet connection by sending an email to your printer's email address.
Lastly, always ensure your printer software is up-to-date to get the most out of your HP 6520.

There could be several reasons why your HP Photosmart 6520 printer is not connecting to Wi-Fi. Here are a few troubleshooting steps you can try:
1. Check Wi-Fi signal strength: Make sure your printer is within range of the Wi-Fi network. Weak or unstable signals might prevent the printer from connecting.
2. Restart the printer: Turn off the printer, unplug it from the power source, wait for about 30 seconds, and then plug it back in. Turn on the printer and see if it connects to Wi-Fi.
3. Restart Wi-Fi router: Restarting your router can sometimes resolve connectivity issues. Unplug the router from the power source, wait for a few seconds, and then plug it back in. Give the router some time to establish a stable connection, and then try connecting your printer again.
4. Verify network credentials: Double-check the network name (SSID) and password you are entering on the printer. Ensure that they are correct and the printer is attempting to connect to the correct network.
5. Disable MAC address filtering: If you have enabled MAC address filtering on your router, make sure to add your printer's MAC address to the whitelist or disable this feature temporarily.
6. Reset network settings on the printer: On the printer's control panel, go to the network settings or Wi-Fi setup menu and look for an option to reset network settings. This will clear any previously entered network information and allow you to set up the connection again.
7. Firmware update: Ensure that your printer has the latest firmware installed. Visit the HP support website, enter your printer's model number, and download any available firmware updates. Follow the instructions provided to update the printer's firmware.
8. Try a different Wi-Fi network: If possible, try connecting your printer to a different Wi-Fi network, such as a mobile hotspot, to see if it successfully establishes a connection. This can help determine if the issue is related to your specific network configuration.
If none of the above steps resolve the issue, it might be helpful to contact HP support directly for further assistance.

To connect your HP Photosmart 6520 printer to Wi-Fi, you can follow these steps:
1. Turn on your printer and make sure it is in a ready state.
. On the printer's control panel, navigate to the "Wireless" or "Network" menu. Some models may have a dedicated wireless button.
3. Select the "Setup" or "Network Setup" option. You may need to enter a password if prompted.
4. In the wireless setup menu, choose the "Wireless Setup Wizard" or "Network Setup Wizard" option. This will scan for available Wi-Fi networks.
5. Select your Wi-Fi network from the list of available networks. If your network does not appear, you can manually enter the network name (SSID) and password.
6. If prompted, enter your Wi-Fi password (WPA/WEP key) using the printer's keypad or touch interface.
7. After entering the password, wait for the printer to connect to your wireless network. Once connected, a confirmation message should appear.
8. Verify the connection by printing a wireless network test report or any other document from a device connected to the same Wi-Fi network.
Your HP Photosmart 6520 printer should now be successfully connected to your Wi-Fi network, allowing you to print wirelessly from any compatible device.

The HP Photosmart 6520 was first released in the year 2012.