HP PAVILION-22BW user manual

1. Check the Power Source: Make sure the power cord for the monitor is plugged into a functioning power outlet or surge protector. If you are unsure whether the outlet works, try plugging in another device to see if it gets power.
2. Test the Power Cord: Sometimes, the power cord itself could be faulty. If you have a spare compatible power cord, try using that instead and see if the monitor turns on.
3. Connect to PC: Connect the monitor to your PC using VGA or HDMI cable, make sure the cable is securely connected. Once connected, turn on your computer.
4. Monitor Settings: Some monitors may be on the wrong input setting. Most monitors have an "Input" or "Source" button which allows you to switch between different input modes such as HDMI and VGA.
5. Power Button: Press the power button on your HP Pavilion-22bw monitor to turn it on. If you don't see the power light indicator (usually a small LED light), this might mean the monitor is not receiving power.
6. Hardware issues: If none of the above works, then the issue might be a hardware problem in the monitor itself. In such case, it would be best to contact HP customer support for further assistance.
(Note: If the monitor is in warranty period, don't try to open it yourself as this might void the warranty. Always seek professional help for hardware issues.)

The HP Pavilion 22bw monitor does not have built-in speakers or a volume button. It relies on external speakers or headphones for audio output, and the volume control should be found on those devices.

The HP Pavilion 22bw monitor typically has four buttons located under the display panel. These buttons are used to navigate the monitor's menu options and make adjustments to the display settings. The specific functions of these buttons may vary slightly depending on the model, but generally, they include:
1. Power button: This button is used to turn the monitor on and off.
2. Menu button: Pressing this button allows you to access the on-screen display (OSD) menu where you can adjust various settings like brightness, contrast, color calibration, etc.
3. Navigation buttons: These buttons are usually represented by an up-arrow, down-arrow, left-arrow, and right-arrow symbol. They are used to navigate through the OSD menu options and make selections.
4. OK/Select button: This button is typically located at the center or in the middle of the navigation buttons. It is used to confirm selections and apply changes made in the OSD menu.
Note: The exact button layout and functions may differ slightly, so it's recommended to refer to the user manual of your specific HP Pavilion 22bw monitor for accurate information.

To change the input source on an HP Pavilion-22bw monitor, you can follow these steps:
1. Locate the buttons on the bottom right corner of your monitor. The buttons should be labeled.
. Press the "Menu" button to access the monitor's OSD (On-Screen Display) menu.
3. Use the navigation buttons (usually labeled with arrows) to move through the menu options.
4. Look for an option related to input source, which may be named "Input," "Source," or something similar.
5. Once you've highlighted the input source option, press the "OK" or "Select" button on your monitor.
6. This will display a list of available input sources, such as HDMI, VGA, or DisplayPort.
7. Use the navigation buttons to select the desired input source.
8. Press the "OK" or "Select" button to confirm your selection.
The input source should now be changed on your HP Pavilion-22bw monitor, and it will display the content from the selected source.