HP OFFICEJET-PRO-8715 user manual

There could be several reasons why your HP printer suddenly stopped working. Here are some common issues and troubleshooting steps you can try:
1. Check the power connection: Ensure that the printer is properly connected to a power source, and the power cable is securely plugged in. Also, make sure the power outlet is working.
2. Connectivity issues: If you're using a wired connection, check if the USB cable is firmly attached to both the printer and your computer. If you're using a wireless connection, verify that your printer is connected to the correct Wi-Fi network and has a stable internet connection.
3. Paper jams: Open the printer and check if there are any paper jams that might be preventing it from functioning correctly. Clear any paper stuck in the printer carefully, following the printer's manual instructions.
4. Ink or toner depletion: Check if your printer's ink or toner cartridge is empty or low. Replace the cartridge if necessary.
5. Driver issues: The printer driver is software that allows your computer to communicate with the printer. If the driver is outdated or corrupted, it may cause printing problems. Update the printer driver to the latest version or reinstall it.
6. Print queue stuck: Sometimes, print jobs can get stuck in the print queue, causing subsequent prints to fail. Clear the print queue by going to "Devices and Printers" on your computer, right-clicking on your printer, and selecting "See what's printing" or "Open Print Queue." Then, delete any pending print jobs.
7. Firmware update: Check if there are any available firmware updates for your printer. Updating the printer's firmware can fix bugs and improve functionality.
If these troubleshooting steps don't resolve the issue, you may need to consult the HP support website or reach out to their customer support for further assistance.

The HP Officejet Pro 8715 was released in 2016.

The Resume button on your HP OfficeJet Pro 8715 printer is used to resume and continue printing after a pause or interruption. It is typically used when there is an error or a need to resume printing from a stopped or paused state.