HP OFFICEJET-J4680 user manual

To reset your HP Officejet J4680 printer, you can try following these steps:
1. Turn off your printer and disconnect the power cord from the back of the printer.
. If your printer is connected to a computer via USB, unplug the USB cable from the back of the printer.
3. Wait for about 30 seconds.
4. Reconnect the power cord to the printer and make sure it is firmly plugged in.
5. If your printer was connected to a computer via USB, reconnect the USB cable to the back of the printer.
6. Turn on the printer by pressing the power button.
7. Wait for the printer to initialize and start up.
This should perform a basic reset of the printer. If you are experiencing specific issues with your printer, you may need to perform additional troubleshooting steps or contact HP support for further assistance.

Yes, the HP Officejet J4680 is a wireless printer that can connect to a Wi-Fi network for wireless printing.

To scan on the HP Officejet J4680 all-in-one printer, you can follow these steps:
1. Place the document or photo you want to scan face down on the scanner glass or into the Automatic Document Feeder (ADF). Make sure that the paper guides are adjusted correctly to hold the document in place.
2. On the printer control panel, locate the "Scan" button. Press it and the printer display will show you several scanning options.
3. Use the arrow buttons on the control panel to navigate through the scanning options and select the desired one, such as scanning to your computer or to a memory card.
4. If you want to scan to your computer, select the desired computer from the list of available devices on the printer display.
5. Once you have selected the scan destination, press the "Start Scan" button. The scanner will start processing your document or photo.
6. After the scanning process is complete, the scanned image will be saved to the selected location or computer.
7. To access the scanned document on your computer, you can go to the folder or application where you specified the scan to be saved.
Note: The exact steps may slightly vary based on the software and drivers installed on your computer.