HP OFFICEJET-6958 user manual

If your HP printer is not printing, follow these steps:
1. Check your Printer: Ensure your HP printer has enough paper, ink or toner, and it doesn't have any error or warning lights. If there are warning lights, refer to your printer's manual or give HP a call.
2. Check your Printer Queue: Go to your Control Panel, then Devices and Printers. Right click on the HP printer and select "See what's printing". You can see if there are any old documents in the queue.
3. Check Connection: Ensure your printer is properly connected to your computer, whether it's a USB cable or wireless connection.
4. Update HP Printer Drivers: Go to the HP website, and under "Support and Drivers", type in your printer model, and download and install the latest drivers.
5. Use HP Print and Scan Doctor: Download and run HP Print and Scan Doctor which can troubleshoot the printer for you.
6. Set your HP printer as Default: Under Devices and Printers, find your HP printer, right click on it, and set it as the default printer.
7. Restart your printer and computer: Sometimes a simple reboot can fix many problems.
If after all these steps, your HP printer is still not printing, it might be an internal problem with the printer itself.

Please note: Always handle electronic appliances with extreme care. If you do not feel comfortable performing these steps, contact HP customer support or a professional.

There could be several reasons why your Officejet 6958 printer is not working. Here are a few common issues and possible solutions:
1. Power issues: Check if the printer is properly connected to a power source and turned on. Ensure that the power cable is securely plugged into the printer and the electrical outlet.
2. Connectivity issues: If you are using the printer wirelessly, check the Wi-Fi connection. Ensure that the printer and your computer or mobile device are connected to the same network. If the connection is weak, try restarting your router or moving the printer closer to the Wi-Fi source.
3. Paper jams: Paper jams can sometimes prevent the printer from working. Open the printer's access door and remove any jammed paper. Make sure the paper is loaded correctly and not exceeding the maximum sheet capacity.
4. Ink or toner issues: Low ink or toner levels can prevent the printer from functioning. Check the ink or toner cartridges and replace them if necessary. Ensure that the cartridges are properly inserted and seated in their designated slots.
5. Driver or software problems: Outdated or corrupted printer drivers or software can cause issues. Visit the official HP website and download the latest drivers and software for your printer model. Install them on your computer following the provided instructions.
6. Hardware defects: In some cases, the printer may have a hardware problem. If none of the above solutions work, contact HP customer support for guidance. They may be able to provide further troubleshooting steps or arrange for repairs if needed.
Remember to consult your printer's user manual or HP's official support documentation for detailed instructions specific to your printer model.

To connect your HP Officejet 6958 to a Wi-Fi network, you can follow these steps:
1. Make sure your printer is turned on and has ink cartridges installed.
2. On the printer control panel, touch the "Wireless" icon or go to the "Setup" menu.
3. Select the "Wireless Setup Wizard" or "Wi-Fi Setup" option.
4. The printer will start searching for available networks. Select your Wi-Fi network from the list of available networks.
5. If prompted, enter the Wi-Fi network password using the on-screen keyboard. Use the touchscreen to enter letters or numbers. Ensure you enter the password correctly.
6. After entering the password, confirm the settings and select "Ok" or "Done".
7. Once the connection is established, the printer will display a confirmation message, and the wireless light on the control panel should become solid.
Now, your HP Officejet 6958 is connected to your Wi-Fi network, and you should be able to print wirelessly.