HP NEVERSTOP-LASER-1001NW user manual

To reset your HP Neverstop Laser 1000w printer, follow these steps:
1. Turn on your printer and make sure it is plugged into a power source.
2. Navigate to the printer's control panel or touchscreen menu.
3. Scroll through the options and select "Settings" or "Setup."
4. Search for a button labeled as "Device Settings," "Device Setup," or "Service."
5. Select "Restore Defaults" or "Reset All." This will reset all the system and network settings of your printer.
6. Once you select this, the printer will likely ask for confirmation. Select the "Confirm" or "Yes" option.
Please note that resetting your printer will remove all of your settings and configuration. If your printer is connected to a network, or if you've set up custom settings on it, this will all be removed, and you'll have to set it all up again after the reset.
If these steps don't work or your printer doesn't have these options, it would be best to contact HP customer service or refer to the specific printer manual for more precise instructions.

If your HP Neverstop Laser 1001nw power button is blinking, it may indicate several issues:
1. Error Status: If there is an error with the printer, such as a paper jam, empty toner or other hardware issue, its power button might blink.
. Printer Processing: If the printer is processing a task or starting up, the power button may blink.
3. Wifi status: It may also indicate the wifi connection status if it's a wireless model.
4. Firmware Update: A blinking power button can also mean that a firmware update is in progress.
Refer to your printer's manual or the official HP Support website for specific solutions related to your model. In general, it's a good idea to check for obvious issues (like paper jams or lack of paper), check your wireless connection, or try to power cycle the printer to solve the issue.

To connect your HP Neverstop Laser 1001nw printer to Wi-Fi, please follow the steps below:
1. Make sure your printer is turned on.
. Press the Wireless button on the printer control panel. The wireless light will start blinking.
3. On your computer or mobile device, go to the Wi-Fi settings and search for available networks.
4. Select the network name (SSID) that matches your printer's wireless network name.
5. If prompted, enter the Wi-Fi password/key to connect to the network.
6. Once connected, the wireless light on the printer will become solid, indicating a successful Wi-Fi connection.
Note: If your printer does not have a control panel with buttons, you can use the HP Smart App to connect your printer to Wi-Fi. Simply download the HP Smart App on your mobile device, follow the instructions, and it will guide you through the setup process.
In case you're unable to find your printer's wireless network name or encounter any difficulties during the setup process, it's recommended to refer to the printer's user manual or visit the HP Support website for detailed instructions specific to your printer model.

Yes, the HP Neverstop Laser 1001nw is a wireless printer. It can be connected to a network via Wi-Fi and can also support mobile and cloud printing.