HP LASERJET-PRO-MFP-M227FDW user manual

No, the HP LaserJet Pro MFP M227fdw is a monochrome (black and white) printer. It can only print in black ink.

To connect your HP LaserJet Pro MFP M227fdw printer to WiFi, you can follow these steps:
1. Make sure your printer is turned on and has paper loaded in the tray.
2. On the printer's control panel, press the "Setup" button.
3. Using the arrows, navigate to the "Network Setup" option and press "OK" to select it.
4. Choose the "Wireless Settings" option and press "OK".
5. Select the "Wireless Setup Wizard" option and press "OK".
6. The printer will start searching for available wireless networks. Once the list appears, select your WiFi network from the list and press "OK".
7. If required, enter the network password using the keypad on the control panel and press "OK".
8. After successfully connecting to the wireless network, the printer will display a confirmation message. Press "OK" to finish the setup.
9. To verify the connection, you can print a Network Configuration Page. Press the "Back" button to return to the main network menu, then select "Print Configuration" or "Print Network Summary" to print the page. This page will display the printer's new IP address and network information.
Your HP LaserJet M227fdw printer is now connected to your WiFi network and ready to be used wirelessly.

To set up your LaserJet Pro MFP M227fdw, follow these steps:
1. Unpack the printer from the box and remove any protective packaging materials.
. Connect the power cord to the printer and plug it into a power outlet.
3. Turn on the printer by pressing the power button located on the front panel.
4. Open the front door of the printer to access the toner cartridge area.
5. Remove the orange, plastic seal from the new toner cartridge and insert it into the printer.
6. Close the front door of the printer.
7. Connect the printer to your computer using a USB cable or set it up for wireless printing by following the on-screen instructions, which will appear on the printer's control panel.
8. Install the printer software on your computer from the CD that came with the printer, or download the latest software and drivers from the HP website.
9. Follow the on-screen prompts to complete the software installation.
10. Once the software installation is complete, you should be able to print a test page to ensure the printer is set up correctly.
Note: If you prefer, you can also set up the printer using the HP Smart app on your smartphone or tablet. Simply download the app, follow the instructions, and connect the printer wirelessly to your mobile device.
If you encounter any issues during the setup process, consult the printer's user manual or visit the HP support website for further assistance.