HP LASER-MFP-137FNW user manual

The price of HP Laser MFP 137fnw cartridges can vary based on the retailer and location. However, as of my current knowledge, it typically costs between $40 - $70. I would recommend checking HP's official website or authorized retailers for the most accurate and current price.

To connect your HP Laser MFP 137fnw to your network, please follow these steps:
1. Make sure your printer is turned on and in a ready state.
. Locate the Wi-Fi icon on the printer's control panel. Press the icon to open the wireless menu.
3. From the wireless menu, select "Setup" or "Network Setup" option.
4. In the setup menu, choose "Wireless Settings" or a similar name.
5. Select "Wireless Setup Wizard" or "Wi-Fi Protected Setup", depending on your printer model.
6. The printer will start searching for available Wi-Fi networks. Choose your network from the list.
7. If your network requires a password, enter it using the printer's control panel keypad.
- Note: Use the arrow keys or navigation buttons on the control panel to enter alphanumeric characters.
8. After providing the correct Wi-Fi password, the printer will attempt to establish a connection to your network.
9. Once the printer is connected to your network, it may prompt you to print a Wireless Network Test Report. You can print it to verify the successful connection.
10. You can also install the printer software on your computer or mobile device by following the instructions provided with your printer or by downloading the necessary drivers from the official HP website.
11. Once the printer software is installed, you should be able to print wirelessly to your HP Laser MFP 137fnw from any connected device on the same network.
If you encounter any difficulties during the setup process, you can refer to the printer's user manual or contact HP customer support for further assistance.

To get your HP LaserJet printer to print, follow the steps below:
1. Firstly, make sure your printer is properly connected to the power source and turned on. Ensure that all cables are securely connected to the printer and your computer.
2. Check if there is sufficient paper in the paper tray. Also, ensure that the paper is loaded properly and the paper guides are set correctly.
3. Make sure that the printer is connected to your computer either via USB cable or through the network connection, depending on the printer model.
4. If you are using a USB connection, verify that the USB cable is securely connected to both the printer and your computer.
5. If your printer is connected via a network, ensure that it is connected to the same network as your computer. You can check this by printing a network configuration page from the printer's control panel.
6. Install the necessary printer drivers on your computer. You can visit the official HP website and enter your printer model to download and install the correct drivers for your operating system.
7. Once the drivers are installed, open the document or image you want to print. Click on the "Print" option in the program you are using, or press "Ctrl + P" on your keyboard.
8. In the print dialog box, make sure to select the correct printer from the list of available printers.
9. Configure any desired print settings such as page orientation, paper size, quality, etc.
10. Finally, click on the "Print" button to start the printing process. Your document should now be printed successfully.
If you encounter any errors or issues while printing, make sure to check the printer's display panel or consult the printer's manual for troubleshooting guidance.

The HP LaserJet MFP 137fnw printer is compatible with the HP 105A toner cartridge.