HP LASER-MFP-135W user manual

Steps to Setup HP Laser MFP 135w Printer:
Unboxing and Setup preparation of HP Laser MFP 135w Printer:
1. Open the box and remove the HP Laser MFP 135w Printer, the setup guide, power cord, the installation disc (if available), and the toner cartridge.
2. Clear a flat surface slightly bigger than the size of the printer and ensure the area is dry and dust-free to keep the printer safe.
3. Replace the packaging material from your printer. The packaging material includes tape, foam, or any other material used to protect the printer during transportation.
4. Unpack the power cord and connect one end to the printer and the other end to a power outlet.
5. Press the power button on the printer to turn it on.
Install Toner Cartridges:
1. Take out the toner cartridge from the package. Shake the new toner cartridge side to side to evenly distribute the toner.
2. Open the cover of the printer and insert the toner cartridge. Make sure it snaps into place.
3. Close the cover of the printer.
Loading Paper:
1. Open the paper tray of the printer and adjust the width and height guides to their maximum position.
2. Place the stack of paper in the tray.
3. Adjust the width, and height guides until they lightly touch the paper stack without bending the paper.
4. Close the paper tray.
Software Installation:
1. You can use the Installation CD that came with the printer, if you have a CD drive or else you can download the printer software from the HP website.
2. Search for HP Laser MFP 135w Printer software.
3. Download and run the software on your computer and follow the on-screen guidance to finish the software installation.
4. During the installation, choose the connection type as ‘Wireless’ if you want to connect your printer to your Wi-Fi.
5. Follow on-screen instructions to get your printer connected to your computer or network and to install the drivers.
Post Installation Steps & Print alignment:
1. After the software installation complete, you may need to align the printer for the first time.
2. You can print a test page to check the alignment.
3. Make small adjustments to correct the alignment, if needed.
4. Now, your HP Laser MFP 135w Printer is ready to use. You can print, scan, or fax according to your needs.
Note: Ensure that your WiFi network is functional and the WiFi credentials are handy if you are planning to use your printer wirelessly.
If you encounter any issues during the setup, it is recommended to refer to the user manual or contact HP customer support.
Make sure you do not touch the surface of the toner cartridges, as this can result in print quality problems.

The HP Laser MFP 135w uses the HP 105A Black Original Laser Toner Cartridge.

Yes, the HP Laser MFP 135w is a wireless printer.

Yes, the HP Laser MFP 135w is capable of scanning documents. It is a multi-function printer that can print, scan, and copy.