HP ENVY-5640 user manual

To connect your HP Envy 5640 printer, follow the steps below:
1. Unpack the printer and remove any packaging materials.
. Connect the power cord to the back of the printer and plug the other end into a power outlet.
3. Press the power button to turn on the printer.
4. On your computer, open the web browser and go to 123.hp.com or support.hp.com.
5. Enter your printer model (HP Envy 5640) and click on "Search" or select it from the list of available options.
6. Select your operating system if prompted.
7. Download and install the latest printer driver and software by following the on-screen instructions.
8. During the installation process, choose the connection type as "Wireless" or "Network" when prompted.
9. Follow the instructions to connect your printer to your wireless network. You may need to select your network name and enter the password.
10. Once the installation is complete, you should be able to print wirelessly from your computer or mobile device.
Note: Ensure that your computer or device is connected to the same wireless network as your printer for successful printing.

There could be a few reasons why your HP Envy 5640 is not picking up photo paper:
1. Paper compatibility: Ensure that you are using the correct type and size of photo paper recommended for your printer. Check the printer's manual or manufacturer's website for the compatible paper specifications.
2. Paper loading: Make sure that you load the photo paper correctly into the input tray or photo tray. Ensure that the stack is aligned properly, the paper guides are snug against the paper, and not overloaded.
3. Tray adjustment: Sometimes, the paper tray adjustment might be incorrect, causing the printer not to pick up the paper. Try adjusting the paper guides in the tray to fit the photo paper size snugly.
4. Clean rollers: Over time, paper dust and debris can accumulate on the paper rollers, which may cause a paper feed issue. Try cleaning the rollers using a lint-free cloth or paper towel lightly dampened with clean water. Allow the rollers to dry completely before reinserting the paper.
5. Printer settings: Check the printer settings to ensure that they are configured correctly for photo printing. Verify the paper type and size settings in the print driver match the type of photo paper you are using.
If the issue persists, it may be helpful to contact HP customer support or visit an authorized service center for further assistance and troubleshooting.