HP ELITEDISPLAY-E223 user manual

1. Connect the display to a power source using the power cord. Ensure the other end of the cord is properly plugged into a working power outlet.
2. Connect the display to your computer using the appropriate cable (HDMI, DisplayPort or VGA). Make sure both ends are plugged in securely.
3. Press the power button located on the bottom right hand side of the display. Some models might have a power switch located at the back of the monitor instead.
4. If your computer is already turned on, your HP Elitedisplay should automatically display what is on your computer screen. If it does not, you may need to adjust the display settings on your computer.
5. If the screen is still black after those steps, press the "Menu" button on your monitor and navigate the on-screen menu to ensure your monitor is configured correctly.
Remember to check if the correct input source (HDMI/DisplayPort/VGA) is selected if you're using multiple cables.
If your monitor fails to power on, make sure the power cord is plugged in properly and the power outlet is functioning. If the problem persists, it could be a hardware issue and you might need to contact HP support or a professional repair service.

To get the volume to work on your HP EliteDisplay E223 monitor, please follow these steps:
1. Ensure that your monitor is properly connected to your computer via an HDMI or DisplayPort cable. Also, make sure that the audio cable is connected securely from the computer to the monitor if required.
2. Check if your computer is sending audio output to your monitor. For Windows users, right-click on the volume icon in the taskbar and select "Open Volume Mixer." Then, verify that the volume is not muted for your monitor. Adjust the volume slider accordingly.
3. If you are using a Mac, click on the Apple menu in the top-left corner and choose "System Preferences." Then, select "Sound" and ensure that the output device is set to your monitor.
4. Some monitors have control buttons on their front or side panel to adjust settings. Look for dedicated volume buttons on your HP EliteDisplay E223 monitor. Press the volume up or down button to adjust the volume. If you can't find specific volume buttons, try using the menu buttons and navigate to the audio settings section to adjust the volume.
5. If the above steps do not work, make sure that the audio drivers on your computer are up to date. Visit the HP support website, enter your monitor's model number (HP EliteDisplay E223), and download the latest audio drivers specifically meant for your operating system.
6. Restart your computer and monitor after installing any necessary driver updates to ensure the changes take effect.
If you are still facing difficulties, it is recommended to refer to the user manual of your HP EliteDisplay E223 for detailed instructions or contact HP customer support for further assistance.

No, the HP EliteDisplay E223 does not have built-in speakers.

The EliteDisplay E231 is a 23-inch monitor.