HP DESKJET-INK-ADVANTAGE-3636-ALL-IN-ONE user manual

There could be several reasons why your HP 3630 is not printing. Here are a few common troubleshooting steps to help identify and fix the issue:
1. Check ink/toner levels: Make sure the ink or toner cartridges have enough ink or toner to print. If they are low or empty, replace them.
2. Paper jams: Check for any paper jams in the printer. Open the printer cover and remove any stuck or wrinkled paper. Make sure the paper is loaded correctly in the tray.
3. Connectivity issues: Ensure that the printer is properly connected to your computer or network. If it's a wireless printer, check the Wi-Fi connection and ensure both devices are on the same network.
4. Printer queue: Sometimes, print jobs get stuck in the queue, preventing further printing. Open your printer settings on your computer and clear any pending print jobs.
5. Printer drivers: Ensure that you have the latest printer drivers installed on your computer. Outdated or incompatible drivers can cause printing problems. You can download the latest drivers from the HP website.
6. Restart printer and computer: Try turning off the printer and unplugging it from the power source. Also, restart your computer. After a few minutes, reconnect the printer and try printing again.
If none of these steps resolve the issue, you may need to consult the HP support website or contact their customer support for further assistance.

To connect your HP DeskJet 3636 printer to your Wi-Fi network, follow these steps:
1. Make sure your printer and the computer or mobile device are both turned on and connected to the same Wi-Fi network.
2. Press the Wireless button on the printer's control panel. The wireless light should start blinking.
3. On your computer or mobile device, open the Wi-Fi settings and connect to the same network that the printer will be connected to.
4. Install the necessary printer software and drivers on your computer or mobile device if you haven't done so. You can download the software from the HP website.
5. Open the printer software and locate the option to connect a new printer. Select the option to add a printer or set up a new printer.
6. The printer software will search for available printers. Once your HP DeskJet 3636 printer is detected, select it and proceed with the installation process.
7. Follow the on-screen instructions to complete the setup. You may be prompted to enter the Wi-Fi network password during the setup process.
8. Once the printer is connected to the Wi-Fi network, the wireless light on the printer will stop blinking and remain solid.
Now your HP DeskJet 3636 printer is successfully connected to your Wi-Fi network and ready for wireless printing.

To reset your HP DeskJet 3636 printer, you can follow these steps:
1. Make sure the printer is turned on.
. Disconnect the power cord from the rear of the printer while it is still turned on.
3. Disconnect the power cord from the wall outlet.
4. Wait for at least 60 seconds.
5. Reconnect the power cord to the wall outlet.
6. Reconnect the power cord to the rear of the printer.
7. Wait for the printer to turn on automatically. If it doesn't, press the power button to turn it on.
8. The printer should now be reset and ready for use.