HP DESKJET-3634-ALL-IN-ONE user manual

Connecting your HP Deskjet all-in-one printer can be done with the following steps:
Before starting make sure you have the Wi-Fi name (SSID), Wi-Fi password (WEP key or WPA2 phrase), a computer connected to your wireless network, Internet access (recommended: cable internet), and, of course, your HP Deskjet All-in-One printer.
1. Unpack your printer, remove all the packaging and connect it to a power source. Turn the printer on.
. Install the cartridges and load paper into the tray.
3. Install the printer software on your computer. You can do this by using the installation CD that comes with the printer or downloading the software from the HP website.
4. While installing the software, choose "Wireless" as the connection type.
5. Follow the on-screen instructions to connect the printer to your wireless network. This usually involves pressing the wireless button on your printer.
6. When instructed, select the name of your wireless network and input your wireless password.
7. After inputting these details, the software would do its work and establish a connection.
When it comes to connecting via USB:
1. Connect the USB cable into the printer
. Plug the other end into an available slot on your computer
3. Drivers should start installing automatically. If not, please download that from the HP website
4. Follow the prompts on your computer screen.
Always consult your specific printer's manual or the HP website if you need more specific instructions.

To connect your HP Deskjet 3634 to Wi-Fi, follow these steps:
1. Ensure that your wireless network is working and you have the network name (SSID) and password.
2. Turn on your printer by pressing the power button.
3. On the printer's control panel, press the Wireless button (looks like a radio signal) or open the Setup menu.
4. Select the Wi-Fi option or Network Setup to enter the wireless setup wizard.
5. The printer will search for available networks. Select your network from the list.
6. If prompted, enter the network password using the printer's control panel. Use the on-screen keypad to enter letters or numbers if necessary.
7. Once the printer is successfully connected to the Wi-Fi network, the Wireless light on the printer will stop blinking and remain solid.
8. At this point, you can install the printer software on your computer. Visit the HP Support website, enter your printer model, and download the appropriate software. Follow the on-screen instructions to complete the installation.
Note: Make sure your computer or mobile device is connected to the same Wi-Fi network as your printer for successful communication between them.