HP DESKJET-3632-ALL-IN-ONE user manual

To connect your HP Deskjet 3632 printer to a new Wi-Fi network, you can follow these steps:
1. Make sure your printer is turned on and in a ready state.
2. On your computer or mobile device, open the Wi-Fi settings and disconnect from any previous Wi-Fi network.
3. Press and hold the Wireless button on the printer control panel until the Wireless light starts blinking. It usually takes around two minutes to initiate the wireless connection process.
4. Go back to the Wi-Fi settings on your computer or mobile device and search for available Wi-Fi networks.
5. From the list of available networks, select the new Wi-Fi network you want to connect your printer to.
6. If prompted, enter the Wi-Fi network password or passphrase and click Connect.
7. Return to the printer control panel and wait till the Wireless light becomes stable. This indicates that the printer has successfully connected to the Wi-Fi network.
8. To confirm if the connection was successful, you can print a Wireless Network Test Report. Simply press and hold the Cancel button on the printer control panel until the Power light blinks, and then release it. The printer will then print the network settings, which includes the wireless connection information.
Your HP Deskjet 3632 printer is now connected to the new Wi-Fi network, and you should be able to print wirelessly from your computer or mobile device.

There could be several reasons why your HP printer is not connecting to Wi-Fi. Here are some common troubleshooting steps you can try:
1. Check Wi-Fi connectivity: Ensure that your printer and the Wi-Fi network are in range and close enough to each other for a stable connection.
2. Restart devices: Power off and unplug both your printer and the Wi-Fi router for a few minutes. Then, power them back on and allow them to restart.
3. Check Wi-Fi network name and password: Verify that you are entering the correct Wi-Fi network name (SSID) and password on the printer. Make sure there are no typos or mistakes.
4. Network congestion: Try moving the printer closer to the Wi-Fi router to avoid any interference or congestion that may be causing the connection issue.
5. Firmware updates: Ensure that your printer has the latest firmware installed. Visit the manufacturer's website and search for any available updates for your specific printer model.
6. Reset network settings: On your printer, find and select the "Wireless" or "Network" settings menu and choose the option to reset network settings to default. Then, try connecting to Wi-Fi again and re-enter all the necessary network details.
7. Security settings: Some printers have advanced security settings that may need to be adjusted. Check your printer's manual or online support resources for instructions on disabling firewall settings or adjusting security protocols.
8. Update printer drivers: Outdated or incompatible printer drivers may prevent the printer from connecting to Wi-Fi. Visit the HP website and download the latest drivers for your printer model.
If none of these steps resolve the issue, it's recommended to contact the HP support team or refer to the printer's user manual for further assistance.

To connect your HP Deskjet 3632 All-in-One printer to your computer, follow the steps below:
1. Ensure that your printer is power on and properly connected to a power source.
2. Turn on your computer and make sure it is connected to a stable Wi-Fi network.
3. Locate the Wi-Fi button on your printer and press and hold it for a few seconds until the wireless light starts blinking.
4. On your computer, open the Settings or Control Panel, and then go to the Printers & Scanners or Devices & Printers section.
5. Click on the "Add a Printer" or "Add a Device" option. This will initiate the process of searching for available printers.
6. Select your HP Deskjet 3632 printer from the list of available printers. If your printer is not displayed, click on the "The printer that I want isn't listed" option and follow the on-screen instructions to manually add the printer.
7. Follow the on-screen prompts to complete the installation process. This may involve downloading and installing the necessary print driver software for your printer. Make sure to choose the correct operating system version during the driver installation.
8. Once the installation is complete, your computer should be able to detect and communicate with your HP Deskjet 3632 printer. You can now start printing, scanning, or performing other functions depending on the capabilities of your printer.
Note: If you prefer to connect your printer via a USB cable instead of a wireless connection, simply connect the printer to your computer using a USB cable and follow the on-screen prompts to install the necessary drivers.