HP DESKJET-2655 user manual

To connect your HP Deskjet 2655 printer, you can follow these steps:
1. Remove all the packaging materials and protective tapes from the printer.
. Place the printer on a flat surface in a location near your computer or wireless router.
3. Connect the power cord to the back of the printer and plug it into a power outlet.
4. Press the power button to turn on the printer.
5. Open the front cover of the printer to install the ink cartridges. Follow the instructions on the printer's display or the included setup guide to correctly install the ink cartridges.
6. Close the front cover of the printer.
7. Connect one end of a USB cable (if you prefer a USB connection) to the USB port on the back of the printer and the other end to an available USB port on your computer.
8. If you wish to connect the printer wirelessly, ensure that your computer is connected to the same wireless network that you want to connect the printer to.
9. On the printer's control panel, press the Wireless button (it looks like a radio signal icon).
10. Use the arrow buttons to navigate to "Setup" and press the OK button.
11. Select "Wireless Setup Wizard" from the list and press OK.
12. Follow the on-screen instructions, select your wireless network, and enter the network password if prompted.
13. Once the printer is connected to the wireless network, you can install the necessary drivers and software on your computer to start using the printer.
You can download the latest drivers and software for your HP Deskjet 2655 from the official HP support website.

To connect your HP Deskjet 2655 printer to Wi-Fi, follow these steps:
1. Ensure your printer is turned on and near the Wi-Fi router.
. Find and press the "Wireless" button on the printer's control panel, usually located on the top or front.
3. The wireless light will start blinking. Press and hold the "Wi-Fi Protected Setup" (WPS) button on your router until the wireless light on the printer stops blinking and remains steady.
Note: If your router does not have a WPS button, skip this step and go to the next.
4. On the printer's control panel, press the "Wireless" and "Information" buttons simultaneously for a few seconds. This will print a network configuration page with the printer's IP address.
5. Open a web browser on your computer and enter the printer's IP address in the address bar. Press "Enter" to access the printer's Embedded Web Server (EWS).
6. From the EWS, go to the "Wireless" or "Network" section and select "Wireless Setup Wizard" or "Network Setup Wizard."
7. Follow the on-screen instructions to connect the printer to your Wi-Fi network. Choose your network from the list, enter the network password if prompted, and click "Connect."
8. Once connected, you may be prompted to install the printer software on your computer. Follow the on-screen instructions to complete the installation using either the HP Smart app or the driver software from the official HP website.
After completing these steps, your HP Deskjet 2655 printer should be connected to Wi-Fi and ready to use wirelessly.

The Wi-Fi password for the HP Deskjet 2655 printer is not a standard password as it varies depending on the network you are connecting the printer to. You will need to enter the Wi-Fi password for your own network during the printer setup process.